|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This is exactly the service manual I needed.
Complete with all schematics, partslists, PCB layouts and alignment instructions.
This manual covers both the T-4970 en T-488F Onkyo tuner.
 ;
IF PRINTED CIRQUIT BOARD WIRING VIEW WAS ONE TONE LIGHTER, THEN 5 STAR RANK HAS TO BE MY CHOISE.
;
Very usefull, good quality drawings !
Muito útil encontrei todas as informações necessárias.
;
Wanting to repair a neighbours tape recorder I needed the necessary information, it makes it easier. Although the service manual is described as "Language : English" To my dismay I found that it is entirely written in German, a language I do not understand. At least I now have the schematics which will help of sorts. I may not use this service again due to the laguage difficulty after all when it states English you do not expect it to be entirely in another language.
;
GOOD SERVICE MANUAL.I ALWAYS BUY THERE IF I FIND WHAT I AM LOKING
5. Error message list
The table below shows the error messages list of the version up tool. Error message Occurring conditions Invalid firmware file. Select a The Bin file of the selected firmware correct file. was improper. (Example: A BIN file of other unit than the AR-NC5J was selected.) Can�t operate more than 32 Printers of over 32 units were selected and Uploading or test print was performed Upload failed. A communication error occurred during uploading. Failed starting Immediately after completion of communication with firmware uploading, the printer could XX:XX:XX:XX:XX:XX. not enter the loader mode. No response after sending After sending the test print command, the commands to there was no response from the ARXX:XX:XX:XX:XX:XX. NC5J. Timeout time is not available. A value other than 1 - 99 or a character is entered for time out setup. Failed to initialize packet Initialization of the packet driver failed driver. when a single network adapter was installed under Win95/98/Me environment. Initialization of the packet driver failed in an adapter after selecting the adapter when plural network adapters were installed under Win95/98/Me environment. The version up tool was executed under Windows NT/2000 without units at the same time.
6. Check for defectiveness of the AR-NC5J
TEST PRINT Refer to [8]
Is the TEST PRINT normal ? NO Use the cross cable between AR-NC5J and PC.
YES
AR-NC5J Normal
Is the TEST PRINT normal ? NO Return the setup to the initial factory setup.
YES
AR-NC5J Normal Troubles other than the AR-NC5J
Refer to [4]-2
Failed to initialize packet driver. Do you want to use other network adapter?
Is the TEST PRINT normal ? NO
YES
AR-NC5J Normal Troubles other than the AR-NC5J
This program does not work in WindowsNT/2000
environment where IPX installing the IPX/SPX protocol. protocol is not installed. Install IPX protocol or execute in Windows95/98/Me environment.
Does the printer print individually ? (When the AR-NC5J is removed from the machine.) NO
YES
AR-NC5J Trouble �
AR-NC5J Normal Troubles other than the AR-NC5J
� If there is another printer than those which conform to the AR-NC5J,
install the AR-NC5J to be checked, and perform the same procedures to check.
AR-NC5J/NC5JG/NC5JW - 9
|
|
|
> |
|
