|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
tres bon document
cela a permis de verifier la connection de l'ecran
merci
salutations
;
The manual was of good quality with high resolution schematic diagrams.
;
The manual was very clear and contained all the information I was looking for. My dishwasher is working again because of this servicemanual!
;
Quality scan, great manual. I solved my problem with this manual.
 ;
The AKAI 1720 model reel to reel tape recorder described in this Manual is quite an old unit - circa late 1960's. As a consequence, the description of the mechanical details - and adjustments thereof - is quite critical. The manual does this quite well. The schematics are also well presented and have detailed PCB overlays. Probably the only negative is that some half-tone detail has been lost from the original manual as it has been scanned in simple B&W.
AR-PB9 5) Attach the PCL PWB. G While ensuring that the connector of the PCL PWB is securely connected to that of the copier, attach the PCL PWB to the PWB cover with seven screws (M3 � 6) and connect the relay harness connector. 8) Attach the PWB cover. G Attach the supplied PWB cover with five screws (M3 � 6).
M3X6
M3X6
M3X6
M3X6
M3X6 M3X6
6) Attach the PCL harness. G Attach the supplied PCL harness to the PCL PWB, then pass it through the square hole of the PWB holder, and connect it to the PCL interface PWB. Note: Be careful about the direction of the blue lines.
Blue lines
9) Attach the PWB cover lid 2. G Hang the pawls of the supplied PWB cover lid 2 on the PWB cover and attach the PWB cover lid 2 with two screws (M3 � 6).
1
2
M3X6 M3X6
Pawls
7) Attach the PWB cover. (1) Fit the upper part of the PWB cover lid to the upper screw that has been loosened in step 3 above. (2) While rotating the lower part of the PWB cover lid clockwise, fit it to the lower screw. (3) Tighten the upper and lower screws to secure the cover lid.
2 3
1
3
3�2
|
|
|
> |
|
