|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
It was a complete manual as stated. Very good source for older product manuals. Thanks
;
Scan quality is very good. Price is very reasonable. If you're looking to purchase a copy of this manual, this is the one to get.
 ;
Perfect for my use.Could have better pictures,but otherwise perfect ;)
;
This is one of four manuals I have downloaded recently.
Purchase was very straight forward and the authorising email arrived in about 4 hours.
The quality of the scan is good. Print is clear and square to the page edges.
;
Exactly as advertized. High quality digital copy of the Nak 610 user manual. Easy download and access. Highly recommended.
FINISHER
Staple cartridge replacement
When the staple cartridge becomes empty, the message �Add staples.� will appear in the message display of the operation panel. Follow the procedure below to replace the staple cartridge.
1 Open the front cover.
NOTES q Do not remove the tape from the cartridge before inserting the staple cartridge into the box. q When reinstalling the staple box, push it in until it clicks into place.
6 Remove the tape from the staple cartridge
by pulling it straight.
2 Turn the staple unit to face up.
7 Reinstall the staple box. 3 Pull the release lever for the staple box and
remove the box.
Push the staple box in until it clicks into place.
8 While pushing the staple unit release lever 4 Remove the empty staple cartridge from the
staple box. to the left, rotate the staple unit to face down.
9 Close the front cover. 5 Insert a new staple cartridge into the staple
box aligning the arrow of the staple cartridge with that of the staple box.
NOTE Make a test print or copy in the staple sort mode to ensure that stapling is performed properly.
5-12
|
|
|
> |
|
