|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
It is perfect, exactly what we needed. It's like the paper version but less clutter.
 ;
Received my manual within 24 hours. Very clear scan of the manual I needed. Thanks!
;
Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
;
Immediate response with excellent service - highly reccommended
;
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
For example, if you are recording an acoustic guitar, V3 has a preset that has been optimized for that instrument. Once the preset is chosen, the user can even fine tune the signal � which shows the true power of V3 technology�it�s tweakable. V3 even features a multi setting, which is useful for a wide variety of applications � like overhead micing, broadcast and field recording. This means that it is now quicker and easier than ever to make great recordings! Musicians want to play, not spend hours adjusting knobs. No other microphone preamp is as user-friendly as the TPS�. VU METER The VU Meter gives an analog representation of the TPS� tube signal level. Besides showing the average analog level, it is sensitive to attack transients. When not using OPL�, the VU Meter is a great indicator of how hard you are running the tube. It also helps in setting a consistent level as you change mics and instrument sources. The VU Meter also reflects the impact of the OPL� circuitry on the signal. For example, if the signal is �in the red� on the meter, the meter will reflect the attenuation of the signal when the OPL� is activated, and the signal is brought out of the �red�. OUTPUT CONTROL The Output Control sets the output level of the TPS�. When the control is fully counterclockwise, there is no output. Turning the control clockwise increases the level of the output signal. When setting the Output level control, refer to the VU Meter for an accurate level leaving the preamp.
-6-
|
|
|
> |
|
