|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
 ;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
AH-A07BE-C/09BE-C AH-A07BE/09BE/12BE AY-A07BE-C/09BE-C AY-A07BE/09BE/12BE
How to remove the display cover
2
1
1. Push the center of display cover from the back. 2. Slide the display cover to the right. How to assemble the display cover
2. Remove the screw fixing the terminal board.
1. Slide the left end of the display cover through 3 hooks on the front panel along the guide from the center of the front panel.
3. Remove a screw fixing the cord holder.
2. After the left half is inseted completely, press the display cover and snap in the 3 hooks on the right. How to remove the control box. 4. Remove 2 screws fixing the board (transformer.
1. Remove the photo detector unit. (Press and spread the upper hook, and the photo detector unit will be ready for removal.)
5. Pull the board.
36
|
|
|
> |
|
