|
There are currently no product reviews.
 ;
Readable text and good copy. Very much needed if you wish to do some repairs on this fine old unit.
;
Fint forløb med levering af manualen. Kvaliteten af skanningen betegnes som middel
 ;
I found the manual to be clear concise and complete. It was of immense assistance when removing the unit as the unit was over 22 years old and the wiring diagram was unobtainable from the manufacturer. The exploded drawings were clear as were the instructions and labels.
;
I will highly recommend this seller. They are honest, accurate, fast and responsible.
;
This manual was very good & was very helpful with repairs.
Always great & fast service from Owner's manual.
AV-20420 AV-20421
STATIC CONVERGENCE ADJUSTMENT (1) Input a crosshatch signal.
(2) Using 4-pole convergence magnets, overlap the red and blue lines in the center of the screen (Fig.1) and turn them to magenta (red/blue).
(FRONT VIEW)
(3) Using 6-pole convergence magnets, overlap the magenta (red/blue) and green lines in the center of the screen and turn them to white. Fig.1 (4) Repeat 2 and 3 above, and make best convergence.
(FRONT VIEW)
DYNAMIC CONVERGENCE ADJUSTMENT (1) Move the deflection yoke up and down and overlap the lines in the periphery. (Fig. 2)
RED
GREEN BLUE
BLUE GREEN
RED GREEN BLUE
(2) Move the deflection yoke left to right and overlap the lines in the periphery. (Fig. 3)
RED
(3) Repeat 1 and 2 above, and make best convergence.
BLUE
GREEN
RED
Fig.2 � After adjustment, fix the wedge at the original position. Fasten the retainer screw of the deflection yoke. Fix the 6 magnets with glue.
(FRONT VIEW) GREEN RED BLUE GREEN BLUE RED RED GREEN BLUE
BLUE GREEN RED
Fig.3
1-28 (No.52111)
|
