|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I was having a hard time finding the problem with this Mackie 1604 unit. I didn't have a schematic. Went looking on the web and found your site and the price was more then reasonable. Ordered it and within the hour had the manual and within 15 minutes had the unit fixed. Best $4.99 I ever spent. Thank you.
Doug
;
This is a service manual in every sense of the word ( French and German versions of the text are included, as well as English..)
There are explanations of the mechanical and electrical functions, plenty of mechanical drawings, and the needed schematics. The quality of the scanning is excellent - all the component values are clearly legible - and very usefully there are pcb component layouts, so you can find a component on the schematic, and then very quicky pinpoint its physical location on the relevant pcb.
I cannot see how I can give this manual any less than the maximum 5 stars! Great value for money, which will pay for itself immediately. Excellent all round!
;
the manual is great and especially hard to find... thanks for the great service and having a hard to find manuel_
;
Please tell us what you think and share your opinions with others. Be sure to focus your comments on the product. You will receive $2.50 of store credit for Your review.
;
hat alles sehr gut geklappt. Das Servicemaual ist gut zu verwenden. Die Pläne und Schrift
ist klar und leserlich. Außerdem preiswert. Grüße an alle Hifi-Bastler
AV21BF10ENS AV21BF10EES AV21BF10EJS AV21BF10EPS
Item 4: 3 HORIZONTAL SHIFT Ad justment Measuring instruments Signal gener ator Test point Ad justment part Ad just 12 ( 4 : 3 ) Ad just 23 ( 16 : 9 ) Description 1. Receive a RED test pattern. 2. Set < 4 : 3 aspect m od e >. 3. Select < ADJUST 12 > from SERVICE MENU. 4. Change horizontal shift till the picture is horizontally centered. Check whether this adjustment is correct after completing Service Mode Adjustment. 5. Set < 16 : 9 aspect mode >. 6. Adjusts with the step whic h is the same above from 3 to 4 about the 16 : 9 aspect mode, too. VERTICAL SLOPE Ad justment Signal gener ator Ad just 13 ( 4 : 3 ) Ad just 24 ( 16 : 9 ) 1. 2. 3. 4. Receive a cross-hatch signal. Set < 4 : 3 aspect m od e >. Select < ADJUST 13 > from SERVICE MENU. Change vertic al slope till the size of squares on both the upper and lower part of tes t pattern bec ome equal to the squares laying on the vertical center of the test pattern. Check and readjust VERTICAL SLOPE item if the adjustment becomes improper after some other geometric adjustments are done. 5. Set < 16 : 9 aspect mode >. 6. Adjusts with the step whic h is the same above from 3 to 4 about the 16 : 9 aspect mode, too. 1. Receive a PAL tes t pattern signal. 2. Set < 4 : 3 aspect m od e >. 3. Select < ADJUST 14 > from SERVICE MENU. 4. Change vertical s lope till horizontal black lines on both the upper and lower part of the test pattern bec ome very close to the upper and lower horizontal sides of picture tube and nearly about to disappear. Check and readjust VERTICAL AMPLITUDE item if the adjustment becomes improper after some other geometric adjus tments are done. 5. Set < 16 : 9 aspect mode >. 6. Adjusts with the step whic h is the same above from 3 to 4 about the 16 : 9 aspect mode, too.
VERTICAL AM P LIT UDE Ad justment
Signal gener ator
Ad just 14 ( 4 : 3 ) Ad just 25 ( 16 : 9 )
14
No. 51884
|
|
|
> |
|
