|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I ordered this manual sometime in the afternoon and I received it on my e-mail the same evening.
This is a fantastically good and properly scanned copy of the original manual. All pages are of the same scale and they overlap each other. It means that you can print the manual and easily make it as a convenient paper manual.
The content of the manual is fantastic. Alignment descriptions, PCB layouts and elementary diagrams are explicit and precise. I immediately found what I was looking for. Thanks to this manual and Owner-Manuals.com my amplifier is alive again. Many thanx indded!
;
The manual was well-scanned and easy to read. As an added bonus, the Operator's Manual was bundled with the Service Manual!
I'd definitely use owner-manuals.com again.
;
Finally, i found one website, where i can download this service manual , and fix my hifi. The service manual is very good, and easy to download and to print.
 ;
Complete and very useful. Could have benefited from a little higher resolution on the schematic and layout diagrams for improved legibility.
;
Great Service Manual, Very Complete, as advertised, Perfect, Thanks!
AV-21DTT2 AV-21DTG2
STATIC CONVERGENCE ADJUSTMENT
1. Input a crosshatch signal. 2. Using 4-pole convergence magnets, overlap the red and blue lines in the center of the screen (Fig.1) and turn them to magenta (red/blue).
(FRONT VIEW )
3. Using 6-pole convergence magnets, overlap the magenta(red/blue) and green lines in the center of the screen and turn them to white. 4. Repeat 2 and 3 above, and make best convergence. Fig.1
(FRONT VIEW )
DYNAMIC CONVERGENCE ADJUSTMENT
1. Move the deflection yoke up and down and overlap the lines in the periphery. (Fig. 2)
BLUE
RED
GREEN BLUE
RED GREEN BLUE
2. Move the deflection yoke left to right and overlap the lines in the periphery. (Fig. 3) 3. Repeat 1 and 2 above, and make best convergence.
GREEN RED
BLUE
GREEN
RED
Fig.2
�
After adjustment, fix the wedge at the original position. Fasten the retainer screw of the deflection yoke. Fix the 6 magnets with glue.
(FRONT VIEW ) GREEN RED BLUE GREEN BLUE RED RED GREEN BLUE
BLUE GREEN RED
Fig.3
No. 51851
29
|
|
|
> |
|
