|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
is part of the manual is very useful for repairing
Here are circuit diagrams
if there is damage, I recommend using this part of the
a complete list of circuit boards and components
 ;
Hello.
This paper enable me, to bring this lovley Scope into Function.
Without this Page, i have no cance to make this finish.
Hans M. Knoll Germany
;
I used for first time this the wheat and am very thanked
;
This manual was exactly what i needed and could not find elsewhere. Price is not too high. Great !
;
ecelent I was reciver the service manual soon I fell so happy very complete 100% positive all by this store tanks atte Luis salazar
Item RGB MODE HORIZONTAL SHIFT adjustment
Measuring instrument Signal generator Remote control unit
Test point
Adjustment part RGBH
Description (1) Input R/G/B circle pattern signal via video input terminal. (2) Press [AV] key on the remote control unit, force the TV to RGB mode. (3) Enter the SERVICE MENU. (4) Select RGBH with the [ / ] key. (5) Adjust RGBH with the [ / ] key until the circle pattern is horizontally centered.(A=B) (6) Check and readjust RGBH item if the adjustment becomes improper after some other geometric adjustments are done.
A
B
VERTICAL SIZE Signal OFFSET generator adjustment (60Hz) Remote control unit
Very close
VSOF
(1) Receive a NTSC-M cross-hatch pattern of vertical frequency 60Hz. (2) Enter SERVICE MENU. (3) Select VSOF with the [ / ] key. (4) Adjust VSOF with the [ / ] key until the horizontal black lines on both the upper and lower part of the pattern become very close to the opper anr lower horizontal sides of picture size and nearly about to disappear. (5) Check and readjust VSOF item if the adjustment bocomes improper after some other geometric adjustments are done.
Screen size
Picture size 100%
Very close
VERTICAL POSITION OFFSET adjustment (60Hz)
Signal generator Remote control unit
VPOF
C
(1) Receive a NTSC-M circle pattern of vertical frequency 60Hz. (2) Enter the SERVICE MENU. (3) Select VPOF with the [ / ] key. (4) Adjust VPOF with the [ / ] key until the picture is vertically centered.(C=D) (5) Check and readjust vertical position item if the adjustment becomes improper after some other geometric adjustments are done.
D
(No.52134)1-17
|
|
|
> |
|
