|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Fint forløb med levering af manualen. Kvaliteten af skanningen betegnes som middel
 ;
I found the manual to be clear concise and complete. It was of immense assistance when removing the unit as the unit was over 22 years old and the wiring diagram was unobtainable from the manufacturer. The exploded drawings were clear as were the instructions and labels.
;
I will highly recommend this seller. They are honest, accurate, fast and responsible.
;
This manual was very good & was very helpful with repairs.
Always great & fast service from Owner's manual.
;
Very pleased with the quality of the scan. No complaints whatsoever.
4.8.5 VSM PRESET SETTING Item VSM PRESET Measuring instrument Remote control unit Test point Adjustment part [5.VSM PRESET] (BRIGHT/STD/SOFT) 1. CONT. 2. BRIGHT 3. SHARP 4. COLOUR 5. HUE (COOL/WARM/NORMAL) 1. WDR R 2. WDR G 3. WDR B Description (1) Set the ZOOM mode to FULL. (2) Select 5.VSM PRESET from the SERVICE MENU. (3) Press the [MENU] key, and set the PICTURE MODE to BRIGHT. (4) Adjust the [FUNCTION UP/DOWN] and [-/+] key to bring the set values of 1.CONT. to 5. HUE to the values shown in the [5. VSM PRESET]. (5) Press the [MENU] key, and set the PICTURE MODE to STD. (6) Make similar adjustment as in 4 above. (7) Press the [MENU] key, and set the PICTURE MODE to SOFT. (8) Make similar adjustment as in 4 above. (9) Press the [MENU] key, and set the COLOUR TEMP to COOL. (10) Adjust the [FUNCTION UP/DOWN] and [-/+] key to bring the set values of 1.WDR R to 3. WDR B to the values shown in the table. (11) Press the [MENU] key, and set the COLOUR TEMP to WARM. (12) Make similar adjustment as in 10 above. (13) Press the [MENU] key, and set the COLOUR TEMP to NORMAL. (14) Make similar adjustment as in 10 above.
1-34 (No.YA063)
|
|
|
> |
|
