|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The downloaded quality was as good as the orignial
 ;
This is a great and complete Service Manual for the Sharp GF8585HB. Giving full and detailed technical insight. Good to find these manuals online.
 ;
Everything was ok with the manual. If I have a small complaint, is that I ordered it during the weekend and I think you guys were closed. But I did receive it late Sunday. I will surely order from you again
 ;
Best Service! Very fast and easy to handle. Fast Download an you can come back every day to download again
 ;
Very good quality, no parts are missing and everthing is readable.
Thank you very much. :-)
AV29BF10ENS AV29BF10EPS AV29BF10EES
Item LUM IN ANCE DELAY Ad justment
Measuring instruments Signal gener ator
Test point
Ad justment part Ad just 06 [ Y-Delay PAL ]
Description
1. Receive a PAL colour bar signal. 2. Select <Adju st 06> from SERVICE MENU. 3. Adjust Y-Delay PAL till the colour transients on the colour bar of the pattern become as sharper and colours between transients do not mix with each other as possible. Note: If the SAW filter is one of the G1965M, J1951M, K2958M, K2962M, G3957M, K6256K, K6259K or M1963M, there is constant group delay dis tortion, so for an equal delay of the luminance and chrominance signal the delay must be set at a value of 160nS. This means the adjustment must be set to the maximum value.
Ad just 07
[ Y-Delay SECAM ] 1. Receive a SECAM colour bar s ignal. 2. Select <Adju st 07> from SERVICE MENU. 3. Adjust Y-Delay SECAM till the colour transients on the colour bar of the pattern become as sharper and colours between transients do not mix with eac h other as possible. Note: If the SAW filter is one of the G1965M, K2958M, K2962M, G3957M, K6256K or K6259K, there is constant group delay distortion, s o for an equal delay of the luminance and chrominanc e signal the delay must be set at a value of 160nS. This means the adjustment must be set to the maximum value.
Ad just 08
[ Y-Delay NTSC ] 1. Receive a NT SC colour bar signal. 2. Select <Adju st 08> from SERVICE MENU. 3. Adjust Y-Delay NT SC till the colour transients on the colour bar of the pattern become as sharper and colours between transients do not mix with each other as possible. Note: If the SAW filter is M1963M, there is constant group delay distortion, so for an equal delay of the luminanc e and chrominance signal the delay must be s et at a value of 160nS. This means the adjustment must be set to the maximum value.
No. 51936
13
|
|
 |
> |
|