|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
tres bon document
cela a permis de verifier la connection de l'ecran
merci
salutations
;
The manual was of good quality with high resolution schematic diagrams.
;
The manual was very clear and contained all the information I was looking for. My dishwasher is working again because of this servicemanual!
;
Quality scan, great manual. I solved my problem with this manual.
 ;
The AKAI 1720 model reel to reel tape recorder described in this Manual is quite an old unit - circa late 1960's. As a consequence, the description of the mechanical details - and adjustments thereof - is quite critical. The manual does this quite well. The schematics are also well presented and have detailed PCB overlays. Probably the only negative is that some half-tone detail has been lost from the original manual as it has been scanned in simple B&W.
AV-29BH11ENS AV-29BH11EPS AV-29BH11EES
Item BOW adjustment
Measuring instruments Signal generator Remote control unit
Test point
Adjustment part BOW 1. 2. 3. 4. 5. 6. 7.
Description Receive a cross-hatch signal. Enter the SERVICE MENU. Press the RED key on the remote control unit, then enter the H/V adjustment group. Select BOW with the UP/DOWN ( / ) key. Adjust BOW with the LEFT/RIGHT ( / ) key and the vertical line straight. Check and readjust BOW item if the adjustment becomes improper after some other geometric adjustments are done. Press the INFORMATION key and memorize the set value.
NOTE : In case where there is a bow-shaped distortion of images on the screen. (Figure)
TRAPEZIUM adjustment
Signal generator Remote control unit
TRAPEZ
1. 2. 3. 4. 5.
Parallel 6. 7.
Receive a cross-hatch signal. Enter the SERVICE MENU. Press the RED key on the remote control unit, then enter the H/V adjustment group. Select TRAPEZ with the UP/DOWN ( / ) key. Adjust TRAPEZ with the LEFT/RIGHT ( / ) key till vertical lines, especially lines at the sides of the picture frame became parallel to the both sides of picture tube as close as possible. Check and readjust TRPEZ item if the adjustment becomes improper after some other geometric adjustments are done. Press the INFORMATION key and memorize the set value.
No. 52085
15
|
|
|
> |
|
