|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The product was good and just what I needed, however I had moderate difficulty with the down load because the sight would not recognize my pass word. I was finally given a direct link to the manual and that worked.
 ;
Very quick and easy website to use and fast download of manual, quality of manual is excellent and will be pleased to use this service again in the future, thanks so much!
;
It is an very good and clear scanned service manual.
very recommended.
;
Easy to order the manual. Good quality and fast delivery.
;
The Service Manual for Sansui AU-9500 was very helpfull, in complete and in good printable condition.
Thanks.
4.8.5 VSM PRESET SETTING Item VSM PRESET Measuring instrument Remote control unit Test point Adjustment part [5.VSM PRESET] (BRIGHT/STD/SOFT) 1. CONT. 2. BRIGHT 3. SHARP 4. COLOUR 5. HUE (COOL/WARM/NORMAL) 1. WDR R 2. WDR G 3. WDR B Description (1) Set the ZOOM mode to FULL. (2) Select 5.VSM PRESET from the SERVICE MENU. (3) Press the [MENU] key, and set the PICTURE MODE to BRIGHT. (4) Adjust the [FUNCTION UP/DOWN] and [-/+] key to bring the set values of 1.CONT. to 5. HUE to the values shown in the [5. VSM PRESET]. (5) Press the [MENU] key, and set the PICTURE MODE to STD. (6) Make similar adjustment as in 4 above. (7) Press the [MENU] key, and set the PICTURE MODE to SOFT. (8) Make similar adjustment as in 4 above. (9) Press the [MENU] key, and set the COLOUR TEMP to COOL. (10) Adjust the [FUNCTION UP/DOWN] and [-/+] key to bring the set values of 1.WDR R to 3. WDR B to the values shown in the table. (11) Press the [MENU] key, and set the COLOUR TEMP to WARM. (12) Make similar adjustment as in 10 above. (13) Press the [MENU] key, and set the COLOUR TEMP to NORMAL. (14) Make similar adjustment as in 10 above.
1-34 (No.YA063)
|
|
|
> |
|
