|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
have download a number of manuals todate , most are excellant, one or two sometimes a little difficult to read but a least avaialable, great site .
Brad.
;
Excellent had everything I wanted, very happy with purchase
 ;
This service is relatively cheap, document is fast available, schematic is readable.
Thanks.
;
So far I´m a satisfied customer. I have only downloaded "TECHNICS SX-KN470 Service Manual" maybe I will use it later.
Best regards
Peter
;
Good manual. It is complete and of high quality, both text and graphics. The schematics are with the original big size, so it can be viewed or printed without any loss of resulution and sharpness.
AV-56WP30
INSTALLATION
1. INSTALLATION SITE
1. The rear of this set is provided with ventilation openings. Install the set more than 5 cm from a wall and in a loc ation with good ventilation. 2. Avoid the following types of locations. (1) Unstable locations (location must be able to withstand heavy weight). (2) Locations subjected to direct sunlight. (3) Near stoves or other heating devices. (4) Locations subjected to humidity or oily smoke. (5) Dusty locations. (6) Locations with s trong vibration.
(more than 5cm)
Wall
VENTILATION OPENING
2. INSTALLATION ADJUSTMENT
When ins talling, moving or changing the orientation of the set, perform static convergence adjustment acc ording to the following procedure. 1. Press the MENU key of the remote c ontrol unit. 2. Select the "CONVERGENCE" in the INITIAL SETUP menu with Function �/� key. 3. Press the Function / key, the convergence adjustment screen appears with cross es (+) dis played in 9 loc ations. Locations where the crosses appear in 3 colours: Convergence adjus tment is required. Perform steps 4 to 5. Locations where the crosses are white: The convergence is adjusted correctly. " lf all the c rosses are white, no c onvergence adjustment is needed. 4. The locations of the crosses c orrespond to the positions of the number keys on the remote c ontrol. A box appears around the selec ted cross. 5. Press the SELECT button to change the color of the box to the c olor of the cross you want to adjust (red or blue). " You c annot adjust the green cross. 6. Use the / and / buttons to adjust the position of the cross. " To c anc el the adjustments before completing the procedure, press the EXIT button. 7. Press the ENTER button to end the c onvergence adjus tment procedure. " lf you do not use the TV controls for roughly one minute, the convergence adjustment screen automatically dis appears.
Fi g.1
Fi g.2
No. 52007
7
|
|
|
> |
|
