|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
THANK YOU FOR A GOOD TRANSACTION, NICE COPY, CLEAR
;
Very Good! All the diagram are easy to read, and its complete.
;
This was an excellent source of detailed assembly information on a device which is at least 12 years old. A very lucky find, coupled with great service.
;
Excellent Service Manual and best price on the Internet. This Service Manual covers everything you could ever need including full circuit schematics, component layout diagrams, stripdown procedure and full parts list/breakdown. I needed this to carry out a modification to one of these headunits and this manual covered everything I needed. Fast delivery, processed within a few hours.
 ;
Thought I would never find a copy of the Technics SX-EN2 Service Manual until I found Owner-Manuals.com. Price was very fair and I received the download promptly. While a photocopy, it is quite readable and includes all the pertinent information and diagrams. Thank you Owner-Manuals!
AVD-C700ES SECTION 4 TEST MODE
[Transfer Mode] 1. Press the [POWER] button to turn the set on. 2. Press the buttons of x and [DISC4] simulaneously for five
3. 4. seconds. The message �MECHA LOCK� displayed. To exit from this mode, press the [POWER] button to turn the set off. 9. Press the > button and the message �1H2L3-4-5� is displayed and DISC1 LED turn on, DISC2 LED turn on dark and DISC 3 to 5 LEDs turn off. Press the > button and the message �1-2H3L4-5-� is displayed and DISC1 LED turn on dark, DISC2 LED turn on and DISC3 LED turn on dark, DISC4 or 5 LEDs turn off. Press the > button and the message �1-2-3H4L5-� is displayed and DISC1 or 2 LEDs turn on dark, DISC3 LED turn on and DISC4 LED turn on dark, DISC5 LED turn off. Press the > button and the message �1-2-3-4H5L� is displayed and DISC1 to 3 LEDs turn off, DISC4 LED turn on and DISC5 LED turn on dark. Press the > button and the message �LED OFF� is displayed and all LEDs turn off. Press the > button. All segments turn on and all LEDs turn on just the same as 3. By pressing the . button and the message �AVD-C700ES� is displayed. Press the . button and the message �Dest <000>� is displayed. Press the . button and the message �STRµ #,##� is displayed. Press the . button and the message �DVDµ #,##� is displayed. To exit from this mode, press the [POWER] button to turn the set off.
10.
11.
[Jog Volume Mode]
* Master Volume Check. Procedure: 1. Press the [POWER] button to turn the set on. 2. To enter the test mode, press the three buttons X , [A.F.D] and Z simultaneously. 3. The message �JOG 0� is displayed. 4. �JOG 0� value increases like +1, +2, +3 ... if rotating the [VOLUME] knob clockwise, or it decreases like -1, -2, -3, ... if rotating counter-clockwise. 5. To exit from this mode, press the [POWER] button to turn the set off. 12.
13. 14. 15. 16. 17.
[Key Check Mode]
* Keyboard check. Procedure: 1. Press the [POWER] button to turn the set on. 2. 3. To enter the test mode, press three buttons X , [PRESET �] and Z simultaneously. In the key check mode, the fluorecent indicator displays �KEYNUM 0�. Each time a button (without the [POWER] button) is pressed, �KEYNUM 0� value increases. However, once a button is pressed, it is no longer taken into account. To exit from this mode, press the [POWER] button to turn the set off. 18. 19.
[Disc Tray Lock]
The disc tray lock function for the antitheft of an demonstration disc in the store is equipped. Setting Procedure: 1. Press the [POWER] button to turn the set on. 2. Press two buttons of x and Z simultaneously for five seconds. 3. The message �LOCKED� is displayed and the tray is locked. Releasing Procedure: 1. Press two buttons of x and Z simultaneously for five seconds again. 2. The message �UNLOCKED� is displayed and the tray is unlocked.
Note: When �LOCKED� is displayed, the tray lock is not released by turning power on/off with the [POWER] button.
4.
[Display Test Mode and Version Display Mode]
* Fluorescent segments and LEDs are tested when this test is activated. Procedure: 1. 2. 3. Press the [POWER] button to turn the set on. To enter the test mode, press the three buttons X , [DISPLAY] and Z simultaneously. All segments turn on and all LEDs turn on. ( MULTI CHANNEL DECODING LED (blue), [DISC 1 to 5] LEDs (blue)) Press the > button and confirm the display and all LEDs turn on. Press the > button and confirm the display and all LEDs turn off. Press the > button and confirm all segments and all LEDs turn off. Press the > button and the message �MCD_LED ON� is displayed and �MULTI CHANNEL DECODING� LED turn on. Press the > button and the message �1L2L3L4L5L� is displayed and DISC 1 to 5 LED turn on dark.
[SHIPMENT Mode]
* The All Clear clears all data including preset data stored in the RAM to initial conditions. Execute this mode when returning the set to the customer. Procedure: 1. Press the [POWER] button to turn the set on. 2. To enter the test mode, press the three buttons [MODE], [PRESET+] and Z simultaneously. 3. The LCD displays the message �SHIP MODE�. 4. Press the G button. 5. The LCD displays the message �FINISHED!� and the set is reset. 6. To exit from this mode, press the [POWER] button to turn the set off.
4. 5. 6. 7.
8.
20
|
|
|
> |
|
