|
There are currently no product reviews.
 ;
Straightforward ordering process. Service manual scan was clear & easy to read. Very comprehensive instructions for alignment. Excellent, thank you.
 ;
Fast, clear and useful. Important for me: the manual is in German.
;
Very good quality. Some parts are not fully readable, but the fundamental ones are fine.
;
very good quality readable manual,printed off very well.
;
The manual was very accurate for the part that I was changing, I was able to order the correct part and had no issues with the replacement procedure. However, I was expecting to have more detailed repairs for the lower drive unit.
5
6
7
8
7. DISASSEMBLY
- Removing the Monitor Assy (Fig.1) Remove the Case. Case
A
1
Remove the four screws.
1
1
Detach two hooks on the tip of a white arrow. Disconnect the cable and then remove the Monitor Assy.
Fig.1
1
Monitor Assy
1
- Removing the LCD Assy (Fig.2) Disconnect the two Cables.
LCD Assy
Cable
B
1
Remove the four screws.
1
1
Detach two Hooks on the tip of a white arrow. Lift the LCD Assy forward, detach lower three hooks and then remove the LCD Assy.
1
Hook
1
Fig.2
C
- Removing the Monitor PCB and Invertor PCB(Fig.3) Disconnect the Cable(1).
Holder
3
Invertor PCB
3 4 1
1 2
Remove the two screws.
Straighten the tab at location indicated.
4
Disconnect the Cable(2) and then remove the Invertor PCB.
4 3 4
Remove the two screws and then remove the Holder. Remove the four screws. Cable(3)
Cable(1)
4
2
D
1
Fig.3
Moniter PCB
Cable(1)
Cable(2)
Disconnect the Cable(3) and then remove the Monitor PCB.
Knob Unit
- Removing the Keyboard Unit (Fig.4,5) Fig.4 Remove the Knob Unit.(Fig.4)
E
1
Remove the three screws.(Fig.5)
1 1
1
Fig.5
Disconnect the Cable and then remove the Keyboard Unit.(Fig.5) Cable Keyboard Unit
F
AVH-P4050DVD/XNCN5
5 6
7
8
63
|
