|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Manual-link came 30 minutes after having paid for an extremely rare (40 years old) item (sony icr-120) and helped me to get the radio rework again. So really good help for me, fast and reliable delivery and -taken that into consideration- a very reasonable price for that service. So thanks again! Mike, Germany
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
AV-N29702
STANDARD CIRCUIT DIAGRAM
q NOTE ON USING CIRCUIT DIAGRAMS
1. SAFETY
The components identified by the symbol and shading are critical for safety. For continued safety replace safety critical components only with manufactures recommended parts.
� Type
No indication MY MM PP MPP MF TF BP TAN (3) Coils No unit Others (4) Power Supply : B1 : B2(12V) : 9V : 5V : Ceramic capacitor : Mylar capacitor : Metalized mylar capacitor : Polypropylene capacitor : Metalized polypropylene capacitor : Metalized film capacitor : Thin film capacitor : Bipolar electrolytic capacitor : Tantalum capacitor
2. SPECIFIED VOLTAGE AND WAVEFORM VALUES
The voltage and waveform values have been measured under the following conditions. (1) Input signal : Color bar signal (2) Setting positions of each knob/button and variable resistor : Original setting position when shipped (3) Internal resistance of tester : DC 20k�/V (4) Oscilloscope sweeping time : H � 20µS/div :V � 5mS/div : Others � Sweeping time is specified : All DC voltage values
: [µH] : As specified
(5) Voltage values
9Since the voltage values of signal circuit vary to some extent according to adjustments, use them as reference values.
9Respective voltage values are indicated
(5) Test point : Test point : Only test point display (6) Connecting method : Connector : Wrapping or soldering : Receptacle (7) Ground symbol
3. INDICATION OF PARTS SYMBOL [EXAMPLE] � In the PW board
: R1209 � R209
4. INDICATIONS ON THE CIRCUIT DIAGRAM
(1) Resistors � Resistance value No unit : [�] k : [k�] M : [M�] � Rated allowable power No indication : 1/10 [W] Others : As specified
: LIVE side ground : ISOLATED(NEUTRAL) side ground : EARTH ground : DIGITAL ground
� Type
No indication OMR MFR MPR UNFR FR (2) Capacitors � Capacitance value 1 or higher less than 1 � Withstand voltage No indication AC indicated Others : Carbon resistor : Oxide metal film resistor : Metal film resistor : Metal plate resistor : Uninflammable resistor : Fusible resistor
5. NOTE FOR REPAIRING SERVICE
This model�s power circuit is partly different in the GND. The difference of the GND is shown by the LIVE : ( ) side GND and the ISOLATED(NEUTRAL) : ( ) side GND. Therefore, care must be taken for the following points. (1) Do not touch the LIVE side GND or the LIVE side GND and the ISOLATED(NEUTRAL) side GND simultaneously. If the above cau-
9Composition resistor 1/2 [W] is specified as 1/2S or Comp.
: [pF] : [µF] : DC50[V] : AC withstand voltage [V] : DC withstand voltage [V]
tion is not respected, an electric shock may be caused. Therefore, make sure that the power cord is surely removed from the receptacle when, for example, the chassis is pulled out. (2) Do not short between the LIVE side GND and ISOLATED(NEUTRAL) side GND or never measure the LIVE side GND and ISOLATED(NEUTRAL) side GND at the same time with a measuring apparatus ( oscilloscope, etc.). If the above precaution is not respected , a fuse or any parts will be broken.
9 Electrolytic Capacitors
47/50[Example] : Capacitance value [µF]/withstand voltage[V]
� Since the circuit diagram is a standard one, the circuit and circuit constants may be subject to change for improvement without any notice.
Dec. 2001 No. 51885
|
|
|
> |
|
