|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I needed the manual immediately and I got it immediately. I couldn't find this manual anywhere else on the net. The site was easy to traverse, and the price was very reasonable. I'll definitely be back for any future needs.
 ;
I received a good service manual, with good resolution. Improve the instructions for the purchase because they are not well understood.
For the rest, so good.
Thanks Angel.
;
Very good documentation for the Grundig 2077 model (as well as similar 800/900/1000 series radios). The first two pages are a summary of reception specifications and output capability. The third page is the tuner dial indicator and dial cord routing diagram. the final ~5 pages are the schematics for the various models (including 2077). The scan quality of the schematics are good, adn can be easily read if zoomed in. The documents are in German, not English as stated. It would have been nice to have the tuning sequence and settings, and some trouble shooting materials... or component and wiring map.
;
Perfect like it was descriped, Perfect like it was descriped
;
Very good detail, all pages clear, exactly what I needed
� Take out the SPEAKER GRILLE. � Take out the FRONT CONTROL BOX. � Take out the SCREEN ASS'Y. (1) Remove 9 screws [ J ] attaching the mirror brackets of the upper, left and right side. (2) Raise slightly to disengage of the mirror from the bottom bracket. (If necessary, loosen the screws attaching the bottom bracket) (3) Take out the MIRROR. NOTE : � The MIRROR is frontcoated. Do not touch the front of the MIRROR. � At least 2 persons are recommended for removable and reassemble.
MIRROR
J
BRACKET MIRROR BRACKET
Fig.4 3.1.8 REAR PANEL (1) Remove 6 screws [ K ]. (2) Remove 4 screws [ L ]. (3) Take out the REAR PANEL. 3.1.9 PARTITION � Take out the REAR PANEL. (1) Pull out the PARTITION backward.
PARTITION
K
L
3.1.10 REAR COVER � Take out the SPEAKER GRILLE. � Take out the FRONT CONTROL BOX. � Take out the SCREEN ASS'Y. (1) Remove 2 screws [ M ]. (2) Remove 2 screws [ N ] from front side. (3) Slightly pull for backside to disengage of the REAR COVER from hooks. (4) Take out the REAR COVER. NOTE : � Because of the large size, at least two persons are recommended for removal and reassemble.
REAR PANEL
Fig.5
REAR COVER
N
M
N
HOOK BRACKET
Fig.6
(No.YA166)1-11
|
|
|
> |
|
