|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Manual was just as described!!! I odered it and in less than a day was able to download it and the text was clear and pages were all complete just as the original manual was. Purcashed this for a friend and they were more than happy. Perfect all around!
 ;
Excellent service and prompt delivery. But it's not a manual - only 4 pages wiring diagrams.
Thanks.
;
The manual I purchased was exactly what I needed to repair my Toshica television. The manual contained schematics and troubleshooting information that was very helpful.
;
Il download del Service Manual JVC HR 4100 non é stato eseguito
;
The Service Manual was just as expected, complete with schematics and I was able to download it in less than an hour after I ordered it. The only problem with these is that the schematics are hard to read due to the small font. I could remedy this by printing them on a larger printer.
AVX-P7000CD,AVX-7000
3No power
No power NO F801 (fuse) is broken out? YES 18.5V is obtained at TP02? If not, the resistance between TP02 and GND is 100k ohms or more? NO Check 18.5V line to remove short-circuits. (CN003 and its periphery) NO
Replace F801.
7V is obtained at TP03? if not, the resistance between TP03 and GND is 500 ohms or more?
Check 7V line to remove short-circuits. (Q201, Q202, Q203, and their periphery)
5V is obtained at TP04? If not, the resistance between TP04 and GND is 35 ohms or more?
Check 5V line to remove short-circuits. (Q201, Q208, Q651, and their periphery)
(-15.5)V is obtained at TP05? If not, the resistance between TP05 and GND is 950 ohms or more?
Check (-15.5)V line to remove short-circuits. (Q881, CN003, and their periphery)
(-5)V is obtained at TP06? If not, the resistance between TP06 and GND is 400 ohms or more?
Check (-5)V line to remove short-circuits. (Q201, Q202, Q203, and their periphery)
Input voltage 9V is obtained at Pin-5 of Q801 (FA7610N)?
Check F801, input flexible cables, and their periphery.
Triangular waves are obtained at Pin-6 of Q801 (FA7610N)?
Check Q801 and its periphery.
Switching waves are obtained at Q804 (TR)?
Check Q801 and its periphery.
Check Transformer (T801) and replace it.
4Out of Sync
Out of Sync YES Video signal is obtained at Q653 (TR)? NO
Check input flexible cables, Q651, and their periphery.
Video signal is obtained at Pin-60 of Q201 (NJW1300A)?
Check R229 (LPF, 360 ohms) and its periphery.
Full-wave oscillating waveform is obtained at Pin-55 and Pin-56 of Q201 (NJW1300A)?
Check X202 (Ceramic resonator) and its periphery.
5V is obtained at Pin-61 of Q201 (NJW1300A)?
Go to item3 No power.
15
|
|
|
> |
|
