|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
It took about 24-hours after my payment before I was able to get to the download. Apparently, payment processing is not 100% automated. That is no big deal, just be aware of that going in.
After I got to it, it was in good shape, easy to read, etc. Not some cheap FAX copy looking thing.
Also, this site was the cheapest I found. Another Plus!
 ;
Good price, very legible manual, exactly what I needed -- but had to wait a day to actually get the download of the manual. Would have preferred to download it immediately after payment rather than waiting for someone to "process" my order. I was surprised that I had to wait that long.
;
As the only source for this manual it rather rank quite high since it is well scanned and perfectly readable.
;
the manual is in good quality and it's in pdf. manual was send in less then 24h.
regards
mike
;
I would not plug this machine in without finding a manual like this. In addition to setup and normal operating instructions, it has troubleshooting flowcharts, diagrammed mechanical adjustments, and schematics to beat the band. The tech I hand it to would be thrilled to find solder side PCB diagrams with component outlines superimposed, pinouts for every IC chip, and line drawings of transistors, with labeled legs.
As for printing quality, this may be a copy of a copy, but even the finest print when enlarged is very legible. There is a bit of grayed print over a few pages, as if a wet page were placed over it, but the print is still very legible. If you could borrow an original manual and get it printed and bound for 4 to 6 times the cost, you could get better quality. In that case you wouldn't be here. For price, utility, and availability I am rating this manual highly.
1
2
3
4
- Removing the Case (Fig.4)
A
1 2 3
Remove the two screws and then remove the Holder. Remove the screw.
3 1 3 2 1 3
3
3
Remove the five screws and then remove the Case.
Case
B
Holder
Fig.4
- Removing the Display Assy (Fig.5)
Motor Unit
Switch
1
Remove the screw.
Disconnect the connector and then remove the Motor Unit.
2
C
Remove the two screws and then remove the two Holders. Pull out the Display Assy in the arrow indicated direction.
1
3
Note) When reassembling, hold the switch down with tweezers or the like and put the Display Assy back to the Chassis. Otherwise, the switch may be damaged and not function properly.
2
2
D
Holder
3
Display Assy Holder
Fig.5
- Removing the Main Unit (Fig.6)
Bracket
2 3 1 3
Shaft Unit
2
1 2 3
Remove the screw and then remove the Bracket. Remove the four screws and then remove the Shaft Unit. Remove the three screws.
2
2
E
3
Disconnect the connector and then remove the Main Unit.
Main Unit
Fig.6
F
84
AVX-P7650TV/ES
1 2 3 4
|
|
|
> |
|
