|
Who's Online
There currently are 5849 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Although printing quality is not the best, the manual was very helpful in order to reactivate this ancient but still good electronic musical instrument.
;
as a first-time user and buyer from this site, i found the overall service outstanding!! this product is a godsend as, without it, i would never have been able to find my way around and use my machine as intended. i will certainly use this site again as required. many many thanx!!
;
This manual is exactly what I needed. This site always has every manual I need, and it is also much less expensive then most other sites. This is the only manual site I will use.
;
Useful manual, good scan, worth the pay if you find the unit difficult to operate.
;
Exactly as described, the full user-manual (145 pages). Perfect.
3gb05305.fm Page 14 Thursday, March 18, 2004 3:09 PM
Detergent dispenser
1. Press the release lever in the prewash compartment downward and remove the drawer. 2. Remove the insert (model �A� and �B1�) or siphon (model �B2�) from the softener compartment. Remove the insert for liquid detergents. For model �A� only remove also the siphon from the chlorine bleach compartment. 3. Wash all the parts under running water. 4. Replace the parts and refit the detergent dispenser. Insert the detergent dispenser in the washing machine.
A A
B1
B2
Mesh Filter in the Water Connection
Check and clean regularly. For washing machines with a straight inlet hose 1. Turn off the tap and unscrew the water inlet hose from the tap. 2. Clean the internal mesh filter and screw the water inlet hose back onto the tap. 3. Now unscrew the inlet hose on the rear of the washing machine. 4. Pull off the mesh filter from the washing machine connection with universal pliers and clean it. 5. Refit the mesh filter and screw the inlet hose on again. 6. Turn on the tap and ensure that the connections are completely water-tight. For washing machines with Water Stop hose 1. Turn off the tap and unscrew the Water Stop hose from the tap. 2. Clean the internal mesh filter and screw the water inlet hose back onto the tap. 3. Turn on the tap and ensure that the connection is completely water-tight. 14
|
|
|
> |
|