|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Product was very good. Received quickly and complete
 ;
Although printing quality is not the best, the manual was very helpful in order to reactivate this ancient but still good electronic musical instrument.
;
as a first-time user and buyer from this site, i found the overall service outstanding!! this product is a godsend as, without it, i would never have been able to find my way around and use my machine as intended. i will certainly use this site again as required. many many thanx!!
;
This manual is exactly what I needed. This site always has every manual I need, and it is also much less expensive then most other sites. This is the only manual site I will use.
;
Useful manual, good scan, worth the pay if you find the unit difficult to operate.
30105539aGB.fm Page 12 Friday, January 21, 2005 11:43 AM
CARE AND MAINTENANCE
Appliance exterior and control panel
� Can be washed down with a soft, damp cloth � A little neutral detergent (non abrasive) can also be used. � Dry with a soft cloth
Door seal
� Clean with a damp cloth when necessary � Check the condition of the door seal periodically
Filter
� Check and clean the filter regularly, at least two or three times a year (see �Removing the filter�).
Detergent dispenser
1. Press the release lever in the prewash compartment downward and remove the drawer. 2. Remove the coloured grid (fig. �A�) from the fabric softener compartment. Remove the insert from the fabric softener compartment. 3. Wash all the parts under running water. 4. Refit the insert and the grid in the detergent drawer and fit the drawer back inside its housing.
A
Mesh filter for water connection
Check and clean regularly. For washing machines with a straight inlet hose 1. Close the tap and loosen the inlet hose on the tap. 2. Clean the internal mesh filter and screw the water inlet hose back onto the tap. 3. Now unscrew the inlet hose on the rear of the washing machine. 4. Pull off the mesh filter from the washing machine connection with universal pliers and clean it. 5. Refit the mesh filter and screw the inlet hose on again. 6. Turn on the tap and ensure that the connections are completely water-tight. For machines with Water Stop hose 1. Turn off the tap and unscrew the Water Stop hose from the tap. 2. Clean the internal mesh filter and screw the water inlet hose back onto the tap. 3. Turn on the tap and make sure the connections are completely water-tight.
12
Black process 45.0° 100.0 LPI
|
|
|
> |
|
