WHIRLPOOL AWM 8000/1-GB
Quick Start

HOT / COLD FILL INSTRUCTION

If you wish to connect hot and cold water supply (Fig.1):
1. Fix one water inlet hose at the red valve of the washing machine and at the hot water tap. 2. Fix the other inlet hose at the white valve of the washing machine and at the cold water tap.

If you wish to connect only the cold fill follow the below instruction (Fig.2):
1. You need a Y-piece connector.The Y-piece connector can be ordered via our Service Organization or purchased in a specialized hydraulic component store. 2. Fix the Y-piece connector to the cold fill tap. 3. Connect the two inlet valves present on the rear part of the machine to the Y-piece connector using the relative provider hoses.

Make sure:
a) The connections are tightly fixed b) Do not invert their position (for example: cold fill into hot inlet valve and viceversa).

Make sure:
All connections are tightly fixed.

Fig.1

Fig.2

Whirlpool is a registered trademark of Whirlpool USA.

5019 301 15091