|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Absolutely perfect! I've been trying to understand how to use all or at least some of the features of the receiver and especially the remote.
;
Copy of genuine owners/operators manual, very useful
;
The manual was a perfect match and was exactly what I was looking for. I'm very satisfied with my purchase.
;
Thank you for having the manual I needed for an older model Aiwa stero I had found on Ebay --- I wanted the Aiwa because I had tapes and cd's but I did not have a manual as to how to operate the system... I found what I needed and it has enabled me to set the system up for my enjoyment.
;
I wished detailed information of the JBL S310 and here I found it! Very happy with the service from this site!
3gb05305.fm Page 14 Thursday, March 18, 2004 3:09 PM
Detergent dispenser
1. Press the release lever in the prewash compartment downward and remove the drawer. 2. Remove the insert (model �A� and �B1�) or siphon (model �B2�) from the softener compartment. Remove the insert for liquid detergents. For model �A� only remove also the siphon from the chlorine bleach compartment. 3. Wash all the parts under running water. 4. Replace the parts and refit the detergent dispenser. Insert the detergent dispenser in the washing machine.
A A
B1
B2
Mesh Filter in the Water Connection
Check and clean regularly. For washing machines with a straight inlet hose 1. Turn off the tap and unscrew the water inlet hose from the tap. 2. Clean the internal mesh filter and screw the water inlet hose back onto the tap. 3. Now unscrew the inlet hose on the rear of the washing machine. 4. Pull off the mesh filter from the washing machine connection with universal pliers and clean it. 5. Refit the mesh filter and screw the inlet hose on again. 6. Turn on the tap and ensure that the connections are completely water-tight. For washing machines with Water Stop hose 1. Turn off the tap and unscrew the Water Stop hose from the tap. 2. Clean the internal mesh filter and screw the water inlet hose back onto the tap. 3. Turn on the tap and ensure that the connection is completely water-tight. 14
|
|
|
> |
|
