WHIRLPOOL AWO/D 4112
Owner's Manual

30110251aGB.fm Page 10 Thursday, April 6, 2006 6:08 PM

Water supply hose
Check the supply hose regularly for brittleness and cracks and replace it if necessary using a new hose of the same type (available from After-Sales Service or specialist dealer). If your supply hose has a transparent hose coating (fig. �C�), periodically check the colour of the transparent coating. If the coating begins to turn red, this is an indication that the hose may have a leak and should be replaced. Contact our After-Sales Service team or specialist dealer to obtain a replacement hose.

A

Mesh filter for water connection
Check and clean regularly. For washing machines with an inlet hose as shown on pictures �A�, �B� or �C� (depending on the model): 1. Close the tap and loosen the inlet hose on the tap. 2. Clean the internal mesh filter and screw the water inlet hose back onto the tap. 3. Now unscrew the inlet hose on the rear of the washing machine. 4. Pull off the mesh filter from the washing machine connection with universal pliers and clean it. 5. Refit the mesh filter and screw the inlet hose on again. 6. Turn on the tap and ensure that the connections are completely water-tight.

B

C

GB 10

Black process 45.0° 100.0 LPI