|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The manual is complete with excellent quality! One suggestion, show number of pages and weather it is multi-lingual. The AD 600 Manuel is about 76 pages and over half is non English. This results in a larger print job than usually needed. Having this information, one could select the desired pages for printing.
 ;
I've been looking for a copy of the original user/owner manual. Just what the doctor ordered, thank you.
 ;
the manual was very helpful thank you very much no one else was able to help me thanx
 ;
This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
 ;
Very happy to find this from owners-manual.com and the enclosed spec sheet as well.
Not longer available from Sony.
Setting and changing of menu items
2
Select �Option Card 1� to display the submenu. When performing the settings with the convertible camera: Press the MENU or ITEM/AWC switch to move the flashing to the setting item, then press the YES/ABC switch to display the submenu. When performing the settings with the remote control unit (AW-RC600): Press the ITEM UP or ITEM DOWN switch to move the flashing to the setting item, then press the DATA YES/UP switch to display the submenu.
4
Return to filming mode. When performing the settings with the convertible camera: Press the MENU or ITEM/AWC switch and select �End� on the main menu, then press the YES/ABC switch. When performing the settings with the remote control unit (AW-RC600): Set the MENU switch to �OFF�. After being returned to filming mode, the convertible camera will operate as per the changed settings.
3
Select the setting item and change the setting. When performing the settings with the convertible camera: Press the MENU or ITEM/AWC switch to move the flashing to the desired setting item, then press the YES/ABC or NO/BAR switch to change the setting. When performing the settings with the remote control unit (AW-RC600): Press the ITEM UP or ITEM DOWN switch to move the flashing to the desired setting item, then press the DATA YES/UP or DATA NO/DOWN switch to change the setting.
- 1 (E) -
ENGLISH
|
|
 |
> |
|