|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
helpful manual.good service.Quick response.will use again
 ;
Speedy confirmation to my order , with elaborate instructions .
Item Email , received immediately as desired by me.
A Pleasant & Satisfying Transaction.
;
I was searching for this manual at last i got it from this web
;
What can i say but i would have been lost without your support.
Thank You!
;
Très satisfait ! envoi rapide, Grand catalogue disponible. Many thanks !
Limiters
$ Setting/releasing the limiters
O For the controller AW-RP301/AW-RP305/AW-RP501/AW-RP505 1. To set the upper limit position of the travel range: Using the controller, tilt the camera to the position which is to serve as the upper limit. While holding down the MEMORY button on the controller, press PRESET button 2 and PRESET button 3 simultaneously for at least 5 seconds. The setting is completed as soon as the lamp of the PRESET button 5 comes on. To release the setting: While holding down the MEMORY button on the controller, press PRESET button 2 and PRESET button 3 simultaneously for at least 5 seconds. The setting is released when the lamp of the PRESET button 10 comes on. 2. To set the lower limit position of the travel range: Using the controller, tilt the camera to the position which is to serve as the lower limit. While holding down the MEMORY button on the controller, press PRESET button 7 and PRESET button 8 simultaneously for at least 5 seconds. The setting is completed as soon as the lamp of the PRESET button 5 comes on. To release the setting: While holding down the MEMORY button on the controller, press PRESET button 7 and PRESET button 8 simultaneously for at least 5 seconds. The setting is released when the lamp of the PRESET button 10 comes on. 3. To set the left-most limit position of the travel range: Using the controller, tilt the camera to the position which is to serve as the leftmost limit. While holding down the MEMORY button on the controller, press PRESET button 1 and PRESET button 6 simultaneously for at least 5 seconds. The setting is completed as soon as the lamp of the PRESET button 5 comes on. To release the setting: While holding down the MEMORY button on the controller, press PRESET button 1 and PRESET button 6 simultaneously for at least 5 seconds. The setting is released when the lamp of the PRESET button 10 comes on. 4. To set the right-most limit position of the travel range: Using the controller, tilt the camera to the position which is to serve as the right-most limit. While holding down the MEMORY button on the controller, press PRESET button 4 and PRESET button 9 simultaneously for at least 5 seconds. The setting is completed as soon as the lamp of the PRESET button 5 comes on. To release the setting: While holding down the MEMORY button on the controller, press PRESET button 4 and PRESET button 9 simultaneously for at least 5 seconds. The setting is released when the lamp of the PRESET button 10 comes on.
- 44 -
|
|
|
> |
|
