AIWA AWPZP5
Owner's Manual

The remote does not function. � Remove the obstacle. � Move the remote closer to the system. � Point the remote at the system�s sensor. � Replace the batteries (R6/size AA). � Locate the system away from the fluorescent light. The system does not turn off. � Press DISPLAY repeatedly until the demonstration display disappears.

The sound skips. � Wipe the disc clean (page 35). � Replace the disc. � Try moving the system to a place without vibration (e.g., on top of a stable stand). � Try moving the speakers away from the system, or placing them on separate stands. When you listen to a track with bass sounds at high volume, the speaker vibration may cause the sound to skip. Play does not start from the first track. � Press PLAY MODE repeatedly until both �PGM� and �SHUF� disappear to return to Normal Play. MP3 audio track cannot be played back. � Recording was not performed according to the ISO9660 level 1 or level 2 format, Joliet or Romeo in the expansion format. � The MP3 audio track does not have the �.MP3� extension. � The file is not stored in MP3 format. � Discs containing files other than MPEG 1 Audio Layer-3 files cannot be played. MP3 audio tracks take longer to begin play back than others. � After the system reads all tracks on the discs, playback may take more time than usual if: � the number of albums or tracks on the disc is very large. � the album and track organization structure is very complex. The album name, track title and ID3 tag do not appear correctly. � Use a disc that conforms with ISO9660 level 1, level 2, Joliet or Romeo in the expansion format. � The disc ID3 tag is not ver. 1 or ver. 2. � Only up to 30 characters of ID3 tags are displayed. � The characters that can be displayed by this unit are as follows: � Alphabet letters � Numbers (0 to 9) � Symbols (< > * + , � / [ ] \ _) Other characters may not be displayed correctly.

Speakers
Sound comes from only one channel, or the left and right volumes are unbalanced. � Check the speaker connections and placement.

CD/MP3 player
�LOCKED� appears. � Contact your Aiwa dealer or local authorized Aiwa service facility. The disc does not eject. � Consult your nearest Aiwa dealer. Play does not start. � Check whether a disc is loaded. (The disc indicator lights up when a disc is loaded.) � Wipe the disc clean (page 35). � Replace the disc. � Insert the disc that this system can play. � Insert the disc correctly. � Insert the disc in the slot with the label side facing right. � Remove the disc and wipe away the moisture on the disc, then leave the system turned on for a few hours until the moisture evaporates. � Press N (or CD N on the unit) to start play. Disc access takes a long time. � Set �CD POWER ON� by CD power manage function (page 14).

Troubleshooting 31GB

continued