|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
;
Well Well Well!!!! Good manual perfect for my hobby!!! As Before you have done a very well done work!!!! Thank you
;
Super nice! Good to have a manual in digital format.
;
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
;
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
Parts and their functions
�Front panel
� Power switch [POWER OFF/ON]
At this setting, the power is supplied to the unit (and the power indicator LED lights). OFF: At this setting, the power is off. ON:
� AGC selector switch [AGC HIGH/LOW/OFF]
HIGH: At this setting, the maximum AGC gain is set to +30 dB. (This value may differ according to the camera used.) LOW: At this setting, the maximum AGC gain is set to +18 dB. (This value may differ according to the camera used.) OFF: AGC does not function. Select the gain using the gain increase selector switch �.
� Power indicator LED [POWER]
When the power switch is set to [ON], this LED lights up green to indicate that the unit can be operated.
� Tally indicator LED [TALLY]
Connect the unit�s tally/intercom input/output connector � with the TALLY & INCOM connector on the live switcher (AW-SW350). This LED lights up red when the unit is selected using the controls on the live switcher.
Fine adjustment of AGC
If, when this switch is at the [HIGH] or [LOW] setting, the scene file switch � is set to [USER], [Auto iris adjust] is set to [ON] on the camera menu and the lens iris selector switch � is set to [AUTO], the AGC level can be finely adjusted using the lens iris control �. (For details on the camera menus, refer to the camera�s operating instructions.)
� Gain increase selector switch [GAIN +18/+9/0(dB)]
This switch is operational only when the AGC selector switch � is at the [OFF] setting. When the AGC selector switch � is at the [LOW] or [HIGH] setting, the gain will remain unchanged even when the setting of the gain increase selector switch is switched. The switch is normally used as the [0 dB] position. When shooting in dark locations and a sufficient video output cannot be obtained even by setting the lens iris to wide open, set it to [+9 dB] or [+18 dB].
� Color bar/camera selector switch [BAR/CAM]
Set this switch to [BAR] to output color bar signals. Normally, it is used as the [CAM] setting.
� Detail compensation selector switch [DTL HIGH/LOW/OFF]
This switch is used to set the amount of detail compensation to HIGH, LOW or OFF. Select the preferred setting.
6
|
|
|
> |
|
