|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Received my manual within 24 hours. Very clear scan of the manual I needed. Thanks!
 ;
Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
;
Immediate response with excellent service - highly reccommended
;
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
;
The owners manual for the Pioneer VSX-D603S was exactly what I needed. I received it in a timely manor and it was priced fairly. I definately will use your servise again. Thank You
Operation
�Adjusting the minimum start speed of the pan/tilt head
When the pan/tilt head is to be operated manually using the joystick, its minimum start speed is automatically adjusted to ensure that the pan/tilt head will start moving smoothly in response to the angle to which the pan/tilt lever is tilted. (This will reduce the amount of play in the pan/tilt lever.) 1. Use the CONTROL button to select the pan/tilt head whose minimum start speed is to be adjusted. 2. Press the MODE button while holding down the MEMORY button. 3. The MODE button lamp starts flashing, and the standby status is established. 4. Press the MODE button to start the adjustment. 5. While the minimum start speed is being adjusted, the lamps of both the MEMORY button and MODE button flash. 6. The adjustment is completed when the lamps of both the MEMORY button and MODE button go off. 7. Repeat steps 2 to 6 for the other pan/tilt heads. If the lamps of both the MEMORY button and MODE button light up and the adjustment process ends, check whether the camera mounted on the pan/tilt head is balanced properly and whether the pan/tilt head cable or other parts are making contact with any objects in the vicinity before proceeding again from step 2. When the joystick is operated while the minimum start speed is being adjusted, the adjustment will be forcibly terminated and only that portion of the setting performed up until that point will be stored in the memory. 3. The MENU button lamp starts flashing, and the standby status is established. 4. Press the MENU button to establish the setting mode. The lamps of both the MEMORY button and MENU button start flashing. If the joystick is operated at this point, the adjustment will be forcibly terminated. 5. Press the PRESET 1 to 8 buttons to set the compensation amounts. This amount is lowest for the PRESET 1 button and highest for the PRESET 8 button. When the PRESET 10 button is pressed, the compensation is set to OFF. When the PRESET 1 to 8 and 10 buttons are pressed, the lamps of both the MEMORY button and MENU button stop flashing, and the setting mode is exited. The same backlash compensation values are applied to both panning and tilting. � Use the OFF setting if backlash is not a concern. When making an adjustment, be absolutely sure to move the pan/tilt head, and perform actual operations to check whether the compensation amount is appropriate before deciding on the proper amount. If this amount is excessive, the pan/tilt head will start returning in the opposite direction as soon as it has been made to come to a standstill. 6. If the compensation amount is inadequate, repeat steps 2 to 5, and find the optimum setting. 7. Repeat steps 2 to 6 for the other pan/tilt heads.
�Adjusting the backlash compensation
Play in the gears may give rise to backlash when the pan/tilt head is moved. This adjustment serves to provide compensation for reducing the amount of this backlash. (Backlash: For instance, after the pan/tilt head has moved from right to left and then come to a standstill, there is a delay in the start of the movement when it moves in the opposite direction. This happens because of play in the gears. The same phenomenon also occurs when the head moves from left to right, up to down or down to up.) 1. Use the CONTROL button to select the pan/tilt head whose backlash compensation is to be adjusted. 2. Press the MENU button while holding down the MEMORY button.
19
|
|
|
> |
|
