|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The only reason I gave this less than 4 stars, is because it shouldn't take 24 hrs to have the download available. I was surprised to find that I had to wait until the next day to be able to download the manual that I paid for.
The manual itself is the correct manual.
 ;
Excellent replacement for original Owner´s Manual. I am totally satisfied!
 ;
Great service. Manual is as advertised and delivered when promised.
 ;
Perfect quality, highly appreciated service !!!
Fast delivery of the download info, no issues at all. Recommended E-manual shop !!!
 ;
hi owners manual- crew,
i am very satisfied about the trade with you.
if i need some other manuals, i will contact you again.
thanks
frank kappler
MAINTENANCE AND CLEANING
APPLIANCE EXTERIOR AND CONTROL PANEL
� � � Clean using normal household cleaner (do not use abrasive products). Dry with a soft cloth. Clean with a damp cloth when necessary.
DOOR SEAL DISPENSER CLEANING INSTRUCTIONS
1. Push in the buttons on each side of the dispenser. 2. Pull the dispenser toward you and remove. A small quantity of water can remain in the soap dispenser. It is advisable to carry the dispenser in an upright position. 3. Wash the dispenser using running water. Note: The siphon caps in the dispenser are also removable for cleaning. 4. Replace the siphon caps in the dispenser (if removed). Make sure that they lock in place. 5. Replace the dispenser by locating the bottom tabs in the door holes and pivot until both of the upper buttons lock.
WATER INLET HOSE(S)
� Periodically check the hose for brittleness and cracks and replace if necessary.
WATER HOSE MESH FILTERS
� Check and clean regularly. For appliances with safety hose 1. Unplug the appliance. 2. Turn off the tap. 3. Unscrew the hose from the tap. 4. Clean the mesh filter carefully under running water without removing it. 5. Screw the hose connection back onto the tap by hand. 6. Unscrew the hose from the appliance. 7. Remove the filter from the appliance connection with pliers and clean it. 8. Refit the filter and screw the hose connection to the appliance. 9. Turn on the tap to check that the connections are completely watertight. 10. Plug in the appliance to the electrical outlet. For appliances with Water Stop hose 1. Unplug the appliance. 2. Turn off the tap. 3. Unscrew the hose from the tap. 4. Remove the loose mesh filter only and clean it. 5. Refit the filter and screw the Water Stop hose connection to the tap. 6. Turn on the tap to check that the connections are completely watertight. 7. Plug in the appliance to the electrical outlet. 13
|
|
 |
> |
|