There are currently no product reviews.
;
Excellent had everything I wanted, very happy with purchase
;
This service is relatively cheap, document is fast available, schematic is readable.
Thanks.
;
So far I´m a satisfied customer. I have only downloaded "TECHNICS SX-KN470 Service Manual" maybe I will use it later.
Best regards
Peter
;
Good manual. It is complete and of high quality, both text and graphics. The schematics are with the original big size, so it can be viewed or printed without any loss of resulution and sharpness.
;
We needed a manual quickly...online it was available immediately, at a very low price. We loved the convenience!
AY-XM7/9/12CR AY-XPM7/9/12CR AE-XM18/24CR
21. Disconnect the 6 terminals(IN+,IN-,L+,L-,OUT+, OUT-) and 1 connector (CN13) on the active filter. And unscrew the 2 screws fixing the active filter and remove it. Note : When the active filter re-install, silicone grease must be paste to the back face of the active filter.
22. Unscrew the 4 screws fixing the heat sink Note : Seal the 4 burring holes with silicone sealer before re-installing.
23. Disconnect the 5 terminals(P(+),N(-),U,V,W) and 2 connectors (CN5A,CN14) on the power transistor module (IPM). And unscrew the 4 screws fixing the power module and remove it. Note : When the power module re-install, silicone grease must be paste to the back face of the power module.
70
|