|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Absolutely perfect! I've been trying to understand how to use all or at least some of the features of the receiver and especially the remote.
;
Copy of genuine owners/operators manual, very useful
;
The manual was a perfect match and was exactly what I was looking for. I'm very satisfied with my purchase.
;
Thank you for having the manual I needed for an older model Aiwa stero I had found on Ebay --- I wanted the Aiwa because I had tapes and cd's but I did not have a manual as to how to operate the system... I found what I needed and it has enabled me to set the system up for my enjoyment.
;
I wished detailed information of the JBL S310 and here I found it! Very happy with the service from this site!
Digital Tuner
English Manual tuning: � Gently turn the ROTARY NAVIGATION ring to 5 or 6 , and then release. � Repeat the above until you reach the desired frequency. To improve reception � For FM, pull out the telescopic aerial. Incline and turn the aerial. Reduce its length if the signal is too strong (very close to a transmitter). � Display shows stereo if FM station is received in stereo. � For MW(AM)/LW the set is provided with a built-in aerial so the telescopic aerial is not needed. Direct the aerial by turning the whole set.
P R
E
Autostore Automatic programming will start with a chosen preset number. From this preset number upwards, former programmed tuner stations will be replaced.The unit will only program stations which are not in the memory already. 1 Press ALBUM, PRESET + or - once or more (¡ or � on the remote control) to select the preset number where programming should start.
N�
CLO
SE
R
OG
R
A
OPE
O
D
E
P
M
C
D
NER
U LT RA BASS 2 � DIG ITA L T U
ALBUM
S
LBUM
PR
E
A
ET
FM MW (AM)/LW
Note: If no preset number is selected, default is preset 1 and all your presets will be replaced.
MP3-CD PLAYBACK
5 To switch off the tuner, press POWER.
Programming tuner stations
Store up to 30 tuner stations in the memory, manually or automatically.You can also erase a preset station by storing another frequency in its place.
2 Press PROGRAM for more than 2 seconds to activate programming. � Display shows 'A' (autostore) and 'Sr ch' and available stations are programmed in order of waveband : FM, followed by MW (AM), and then LW stations (LW not on all versions) The last preset automatically stored will then be played.
10
S E
T
M
|
|
|
> |
|
