AIWA AZ-BS32
Owner's Manual

Presetting radio stations
You can preset up to 20 FM radio stations, 10 stations each for FM 1 and FM 2.

To preset a station manually

To preset stations automatically (Auto preset)

(Manual preset) If there is a station that cannot be preset automatically, you can preset it manually by the following procedure. Before starting, you must exit the auto preset mode (� � and the preset numbers should not be displayed). 1 Press TUNER repeatedly to select �FM 1� or �FM 2.� 2 Tune in the station you want to preset. 3 Press and hold PRESET for more than 2 seconds. � � and the preset numbers flash in the display. 4 Within 10 seconds, press . or > repeatedly to select the preset number you want to store the station on. The selected preset number starts flashing. 5 Within 10 seconds, press PRESET.

1 2 3

Perform steps 1 and 2 of �Listening to the radio� (page 15) to select the band. Press PRESET. � and the preset numbers appear in the display. Press and hold PRESET for more than 2 seconds. � � starts flashing, and the player starts scanning for stations from the lower frequencies. �

To tune in a preset station

1 2
The first received station is preset on the preset number 1, and then the player starts scanning for the next receivable station.

Press TUNER repeatedly to select �FM 1� or �FM 2.� Press PRESET to display the preset numbers. Press . or > repeatedly to select the preset number of the station you want to tune in.
Using the radio

3

If you press Nx/POWER or TUNER during auto presetting, the player stops scanning and exits the auto preset mode, and music data playback starts or the radio is switched to the other band.

To clear all preset stations
Turn off the power, remove the �pavit� from the player, and press and hold Nx/POWER for more than 10 seconds. The preset stations return to those at the time of purchase.

17