|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
;
Well Well Well!!!! Good manual perfect for my hobby!!! As Before you have done a very well done work!!!! Thank you
;
Super nice! Good to have a manual in digital format.
;
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
;
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
Programming Tutorial Editing Presets
To Change the Instrument for any Layer in the Preset
6. 7.
Move the cursor back up to the �rst �eld in the �rst line (the layer). Use the Data Entry Control to select the layer you want.
L2
INSTRUMENT
ROM:B3
0104 org: 1 6� D i r e c t Fb
8.
Repeat steps 3 and 4 for each selected layer. Find an instrument that sounds good when combined with the previous instruments selected.
With all these great instruments to work with, you really can�t go wrong. Now let�s play with the tuning.
Changing the Tuning of an Instrument
Tuning the selected layer of the preset changes the pitch of the key on the controller. If the numbers are �00,� it means that the instruments are tuned to concert pitch (A=440 Hz). The Coarse tuning value represents whole semitone intervals. The Fine tuning value shifts the pitch in 1/64 semitones (or 1.56 cents).
To Tune the Instrument of the Current Layer
1.
Scroll through the Edit menu until you come to the Tuning page.
L1
TUNING Coarse: +36 Fine: +6
2. 3.
Move the cursor to the Coarse �eld (using the cursor button). Set the value to +12 to shift the pitch up a whole octave. To shift the pitch in smaller units than a semitone, use the Fine �eld.
Try tuning one of the instruments to a perfect �fth above the other by setting the Coarse value to +7. Tuning an instrument far out of its normal range completely changes the character of the sound. For example, if you tune a bass guitar up 2 octaves, it's going to sound rather petite. On the other hand, if you tune it down 2 octaves, you can probably rattle plaster off the walls! Experiment with radical pitch shifting. You'll be surprised at the results.
130 E-MU Systems
|
|
|
> |
|
