This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
Nothing wrong with the manual or the delivery - came to me the same day I ordered it. But afterwards I realized that I ordered the wrong manual. Probably better with the Quick start - version. So maybe it would be better if we could see a list with inhold for each manual before ordering?
Bought T4850 High End Tuner a few years ago, but i didn't know where all the buttons were used for. So i purchased the owners manual. Perfect! Just what i needed.
Text excerpt from page 13 (click to view)
OPERATING INSTRUCTIONS
Before first use
Initial Cleaning
Before you use the oven for the first time, you should clean it thoroughly. You can switch on the oven lighting to make cleaning easier. 1. Turn the oven function switch to oven lighting . 2. Remove all accessories and the side rails, and wash with warm water and washing up liquid. 3. Also wipe out the oven with warm water and washing up liquid, and dry. 4. Clean the front of the appliance with a damp cloth only.
i
Tip: In the case of stainless steel fronts, use commercially available stainless steel cleaners that also form a protective film against finger marks. Important: Do not use any caustic or abrasive cleaners! The surface could be damaged.
!
Setting the clock
Tip: The oven will not function until the clock is set. The clock must be set before the oven is used and whenever power has been disconnected to the appliance. If the clock needs to be set, you will see �0.00� flashing in the display.
Use �+� and �-� to set the right time. After around 3 seconds, the new time will be accepted and the display will stop blinking.
