|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
;
Well Well Well!!!! Good manual perfect for my hobby!!! As Before you have done a very well done work!!!! Thank you
;
Super nice! Good to have a manual in digital format.
;
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
;
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
BA-115SP Bassamp Cube with Digital Effects
THE TOP PANEL:
1. 0dB INPUT: Connect your �passive� bass guitar here using a shielded instrument cable. This input is not padded and is best suited for basses without active electronics. 2. -15dB INPUT: Connect your �active� bass here using a shielded instrument cable. This input is padded 15dB and is best suited for basses with active electronics and/or �hot� pickups. 3. VOLUME: Use this control in conjunction with your instrument�s volume controls to adjust the level of the signal sent to the preamp. For the best signal to noise ratio and maximum headroom, start with this control at 5 or greater. 4. STYLE: This five-position switch is used to control the tone of the amplifier. Experiment with the Style and other eq controls (#5,6,7) for the results which suit you best. The settings of the style control are as follows:
5. LOW: This control is used in conjunction with the style control to adjust the low frequency level of the amplifier. 6. MID: This control is used in conjunction with the style control to adjust the midrange level of the amplifier. 7. HIGH: This control is used in conjunction with the style control to adjust the high frequency level of the amplifier. 8. LEVEL: Use this control to adjust the level of the output signal from the amplifier. This control also adjusts the signal level of the CD Inputs (#12), the Headphones jack (#13) and the Line Out jack (#15). 9. EFFECTS SELECT: Use this control to select the desired digital effect. A listing of the effects is shown on page 6. 10. EFFECTS ADJUST: Use this control to adjust one of the parameters of the selected digital effect. A listing of the parameters for each of the effects is shown on page 6.
4
|
|
|
> |
|
