|
There are currently no product reviews.
 ;
have download a number of manuals todate , most are excellant, one or two sometimes a little difficult to read but a least avaialable, great site .
Brad.
;
Excellent had everything I wanted, very happy with purchase
 ;
This service is relatively cheap, document is fast available, schematic is readable.
Thanks.
;
So far I´m a satisfied customer. I have only downloaded "TECHNICS SX-KN470 Service Manual" maybe I will use it later.
Best regards
Peter
;
Good manual. It is complete and of high quality, both text and graphics. The schematics are with the original big size, so it can be viewed or printed without any loss of resulution and sharpness.
1
2
3
4
5. DIAGNOSIS
A
5.1 POWER ON SEQUENCE
Power On Sequence
Pressing of the POWER key is detected by the IC3601 Submicrocomputer on the MAIN Assy. The IC3601 then outputs a POWER_ON signal to the SYPS Assy.
After receiving the POWER_ON signal, the SYPS Assy activates, secondary Power, setting it to ON.
B
The SMP8634 (IC1001), the core LSI, starts up.
Communication between the SMP8634 and the DDR SDRAM starts.
C
Communication between the SMP8634 and the FLASH_IC starts.
It takes about 1 minute to complete the startup process.
D
Troubleshooting
Are the pins at CN6051 and CN6002 supplied with voltages?
E
Is the reset signal H? (R1088)
Is the 27-MHz CLK oscillating? (X1001)
F
22
1 2
BDP-LX70
3 4
|
