PIONEER BDP-LX91/WL
Owner's Manual

� Changing the speaker setup
Set whether or not speakers are connected to the AV receiver or amplifier, as well as the size of the speakers. This setting is only valid for the AUDIO OUT (7.1 ch) terminals. Caution � The Speaker Setup cannot be selected when Audio Output Mode is set to 2 Channel. Change the setting to Multi-channel (page 43). 1 Select and set Speakers � Speaker Setup � Next Screen. Use �/� to select, then press ENTER. 2 Select the speaker and change the setting. Use �/� to select, then use �/� to change the setting.
Speaker Setup BD PLAYER L/R C SL/SR SBL/SBR SW Large Large Large Large Yes

2 Select the speaker and adjust the distance. Use �/� to select, then use �/� to adjust.
Speaker Distance BD PLAYER L C R SR SBR SBL SL SW 3.00 m 3.00 m 3.00 m 3.00 m 3.00 m 3.00 m 3.00 m 3.00 m

06

� The distance of all the speakers can be set to between 0.01 m and 9.00 m, in units of 0.01 m.

� Adjusting the output level of the different speakers (Channel Level)
Adjust each output level of the different speakers by using test tones. This setting is only valid for the AUDIO OUT (7.1 ch) terminals. Caution � This cannot be selected when Audio Output Mode is set to 2 Channel. Change the setting to Multi-channel (page 43). � Channel Level of the speakers set to None or No at Speaker Setup cannot be adjusted (above). � Test tones are output. Lower the volume of the device connected to the player. 1 Select and set Speakers � Channel Level, then Fix or Variable. Use �/� to select, then press ENTER. � Fix � The output level of all the speakers is set to the maximum. � Variable � The output level of all the speakers is set 6.0 dB lower than when Fix is selected. From this point, the output levels of the L, C, R, SL, SR, SBL, SBR and SW speakers can be adjusted within the range of �6.0 dB to +6.0 dB. If you have selected Variable, proceed to step 2. 2 Select and set the method for switching the speaker to be adjusted. Use �/� to select, then press ENTER.
Speaker Setup BD PLAYER Video Out Audio Out Speakers HDMI MAIN HDMI SUB Playback Language Parental Lock Test Tone Switching Select whether test tone output is switched automatically or manually.

� L/R (front left and right speakers): Large/Small � C (center speaker): Large/Small/None � SL/SR (left and right surround speakers): Large/Small/None � SBL/SBR (left and right surround back speakers): Large/Small/ None � SW (subwoofer): Yes/No Note � Depending on the combination of settings of the different speakers, the settings of speakers other than the one you have changed may also change automatically.

� Adjusting the distance of the different speakers
Adjust the distance between you and the different speakers. This setting is only valid for the AUDIO OUT (7.1 ch) terminals. Caution � This cannot be selected when Audio Output Mode is set to 2 Channel. Change the setting to Multi-channel (page 43). � Speaker Distance of the speakers set to None or No at Speaker Setup cannot be adjusted (above). 1 Select and set Speakers � Speaker Distance � Next Screen. Use �/� to select, then press ENTER.

Auto

Manual

� Auto � Switch the speaker to be adjusted automatically. � Manual � Switch the speaker to be adjusted manually.

45
En