|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Actually, I was looking for this information for 3 years!...now thanks to you, the manual is on my hands and of great help, cause I understand now where I was doing wrong connections and wires...excellent, I'll be back to you if in need, thank you.
 ;
This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
;
Good list of manuals. I found a very rare one and easily get. Should be promptly to download, as we must to wait hours even after confirmed payment.
;
The manual was properly scanned and perfectly readable. The only small problem is that I couldn't use my dear Ctrl + F to find a word I needed.
;
Nothing wrong with the manual or the delivery - came to me the same day I ordered it. But afterwards I realized that I ordered the wrong manual. Probably better with the Quick start - version. So maybe it would be better if we could see a list with inhold for each manual before ordering?
ACTION
LIFT HEIGHT ADJUSTMENT
DESCRIPTION
� The Height of the lift is wrong on your turntable � The Height of the Arm Rest is wrong on your turntable � You do not have the Arm Collar
HOW TO ADJUST
� Adjust the lift heigh t by moving the bent lift bar unscrewing with the Allen key supplied the hex bolt positioned in front of it � Adjust the Arm Rest height by moving its shaft up or down screwing its stainless steel bolt � collar Ask your local dealer to get a proper Bluenote
ARM REST HEIGHT ADJUSTMENT ARM VTA ADJUSTMENT
� The VTA tone arm is Hard to adjustable �
� The Bluenote 3 arm board collar hex bolts are screwed into the collar too much and d not let the arm o shaft gets in it; unscrew the hex bolts properly � Once the proper height of the arm is been approximately reached, fix the shaft with just a hex bolt before screwing properly all the 3 hex bolts of the collar � Adjust the movement by gently screwing clockwise or anti-clockwise the cover of the cylinder of the arm lift shaft which push the internal calibrated spring � The tone arm has a scaled counterweight every turn (divided in 5 steps on the counterweight) increases or decreases 1gram. To adjust the Tracking Force: Position the weight in a way that the arm floats freely in the air (zero weight). Rotate clockwise the counterweight every complete turn adds 1gram to the tracking force applied on the cartridge (the counterweight engraved part is divided in 6 different sections; every section move the tracking force of 0,20gram). Firmly clamp the counterweight screwing the 2 Allen bolts. Adjust the Azimuth force rotating the orthogonal cylindrical weight on the counterweight properly (Typically few millimetres towards the platter) � The tone arm is been designed to be used with cartridges that have a minimum total weight of 5gram up to circa 25gram
ARM LIFT MOVEMENT
DOWN
SPEED
� The Speed of the tone arm going down is wrong � It�s hard to find the right tracking force of your Phono cartridge
COUNTER WEIGHT ADJUSTMENT
PHONO CARTRIDGE MATCHING
� Do not know what and how to match a Phono cartridges
F.A.Q. & Adjustment
10
|
|
|
> |
|
