|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
;
Well Well Well!!!! Good manual perfect for my hobby!!! As Before you have done a very well done work!!!! Thank you
;
Super nice! Good to have a manual in digital format.
;
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
;
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
Cleaning Air Conditioner Your
Proper use and care of your air conditioner will help ensure longer life of the unit and lower operating costs. Follow these instructions carefully. Call your authorized servicing dealer for an annual checkup.
Cleaningfront panel and filter
Explosion Hazard Unplug power cord from outlet before cleaning air conditioner. Use only nonflammable cleaners. Failure to follow these instructions can result in death, explosion, fire, or electrical shock. I. Unplug power cord. 2. Remove the front panel from unit for cleaning. Press down at top of front panel to release it from top of cabinet. Watch out for the sharp metal fins on the coils. 3. Pull top of front panel toward you. 4. Lift up and away from bottom spring clips.
Tabs
5. Remove filter from front panel by removing elastic band which holds it in place. 6. Clean filter by using a vacuum cleaner or, if very dirty, wash filter with warm water and a mild detergent. Air dry thoroughly before replacing. Do not use a hot air dryer on filter. 7. Clean front panel using a soft cloth with warm water and a mild detergent. Rinse and dry. 8. Replace filter and hold it in place with elastic band. 9. Wipe control panel clean with a soft, dry cloth. 10. Replace front panel. Locate bottom of panel on the spring clips. Press down on top edge of front panel and push front toward unit to secure upper tabs. 11. Reconnect power supply. 5
|
|
|
> |
|
