5-4. DIRECT PRINTING FUNCTION OF THE IMAGE FROM DIGITAL CAMERAS (BJ M70 only) <Difference from the BJC-80/80v> The new adoption of IrTranP has enabled the printing of data directly sent from digital cameras compliant to IrTranP standards, not through the host computer, but via IrDA communication. Specifications Data communication form: Input image size: Input image capacity: Output image size: Paper size: IrTranP standards compatible 640 x 460 pixels 128 Kbyte or less Landscape: 90 x 68 mm Portrait: 77 x 103 mm Seal printing: 19 x 26 mm x 16 images Postcard
Operation <Image printing> After receiving the data, the image data is output by pressing the RESUME button, and releasing before the beeper sounds. This is not effective when an error has occurred or paper is fed. <Reprinting> The image data is also maintained in the memory after printing, and will not be abandoned until new image data is received from the digital camera, or print data is input from the host computer. Reprinting of data is possible by pressing the RESUME button (and releasing before the beeper sounds). <Printing cancellation> During the printing of image data, printing is cancelled by pressing the RESUME button until the beeper sounds once, then releasing. In this case paper is delivered. The remaining data halfway through printing is abandoned. (As the image data has been maintained, it is possible to reprint the data, without resending the data from the digital camera.) <Printing position definition> To select the printing position, press the POWER button and cartridge replacement button simultaneously when the power is on, and release the buttons after the beeper sounds the number of times applicable to the printing position to be selected. This setting returns to the default (Landscape) by powering off. The number of beeper sounds is as follows: Once: Twice: 3 times: 4 times: 5 times: Portrait 16-image seal printing Photo glossy card landscape Photo glossy card portrait Setting completed. (The power is normally turned on.)
12
