|
Who's Online
There currently are 5867 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
;
Très-très bon site, facile, très bon prix.
Au futur besoin, je n’hésiterais à faire appel à vous.
Merci
2-2-6. Pinch Roller Replacement
Removal 1. Remove the Pinch Arm Assembly (1) Remove the stop washer at the top of the pinch arm. c If a poly-slider washer is inserted between the pinch arm assembly and the stop washer, remove it. This poly-slider washer is used for vertical play adjustment. (2) Remove the pinch arm assembly from the threading ring. c Do not remove the poly-slider washer and spring at the bottom of the pinch arm assembly from the shaft.
Pin
Stop washer Poly-slider washer Pinch arm assembly
Groove Threading ring
Installation 2. Install the Pinch Arm Assembly (1) Pass a new pinch arm assembly through the shaft while hooking the spring as shown in the figure. c Insert the short-end spring into the groove of the threading ring and hook the long-end spring to the pin of the pinch arm assembly. (2) Fix the pinch arm assembly by the stop washer. (3) Push the pinch arm assembly manually in the direction of the drum, then release. At that time, confirm that the pinch arm assembly smoothly returns to the former position.
Spring
Remove/Install the Pinch Arm Assembly
2-37
|
|
|
> |
|