|
There are currently no product reviews.
 ;
Very good quality. Some parts are not fully readable, but the fundamental ones are fine.
;
very good quality readable manual,printed off very well.
;
The manual was very accurate for the part that I was changing, I was able to order the correct part and had no issues with the replacement procedure. However, I was expecting to have more detailed repairs for the lower drive unit.
 ;
I needed the manual immediately and I got it immediately. I couldn't find this manual anywhere else on the net. The site was easy to traverse, and the price was very reasonable. I'll definitely be back for any future needs.
;
I received a good service manual, with good resolution. Improve the instructions for the purchase because they are not well understood.
For the rest, so good.
Thanks Angel.
2-2-6. Pinch Roller Replacement
Removal 1. Remove the Pinch Arm Assembly (1) Remove the stop washer at the top of the pinch arm. c If a poly-slider washer is inserted between the pinch arm assembly and the stop washer, remove it. This poly-slider washer is used for vertical play adjustment. (2) Remove the pinch arm assembly from the threading ring. c Do not remove the poly-slider washer and spring at the bottom of the pinch arm assembly from the shaft.
Pin
Stop washer Poly-slider washer Pinch arm assembly
Groove Threading ring
Installation 2. Install the Pinch Arm Assembly (1) Pass a new pinch arm assembly through the shaft while hooking the spring as shown in the figure. c Insert the short-end spring into the groove of the threading ring and hook the long-end spring to the pin of the pinch arm assembly. (2) Fix the pinch arm assembly by the stop washer. (3) Push the pinch arm assembly manually in the direction of the drum, then release. At that time, confirm that the pinch arm assembly smoothly returns to the former position.
Spring
Remove/Install the Pinch Arm Assembly
2-37
|
