|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
It is OK, this manual help me to repair my dynacord
 ;
Good manual. Even it is an old printed manual, it is well scanned and complete, with all drawings, schematics and parts list. Very good return for the cost.
;
I'm very satisfied with my purchase. It resolved my problem. Owner-manuals.com is a very very good place.
Thank you!
;
Veramente completo, dettagliato e perfetto nella visione. Perfect, thanks!
;
Fully functional usable service manual. Considering the age of the manual and device quality was better than expected
1-4. Location and Function of Switches/LEDs
![ S12 : SCH adjust switches Used to adjust the SCH phase. When you set a switch to ON, the phase will shift by the amount corresponding to the switch shown in the following table. If you set two or more switches to ON, the phase will shift by the total amount of the corresponding switches.
Switch No. S12-1 S12-2 S12-3 S12-4 S12-5 S12-6 S12-7 S12-8 S12-9 S12-10 Amount of the adjustment (�) 0.35 0.70 1.41 2.81 5.63 11.3 22.5 45.0 90.0 180.0
Factory setting: S12-4, -5, -9, -10 ; ON S12-1, -2, -3, -6, -7, -8 ; OFF !] S13:Q-FILTER (Q filter ON/OFF) switch Selected the Q filter of output video signal. ON : Set the Q filter to 0.5 MHz. OFF : Set the Q filter to 1.5 MHz(same as I axis). Factory setting: ON !\ S1: Free-running adj. switch Factory setting: OFF
1-6 (E)
BKPF-132B
|
|
|
> |
|
