Main Menu (continued)
INPUT SELECT
The underlined values are factory preset setting values. Sub menu VIDEO / Y/C Settings <AUTO> <NTSC> <PAL> <75> <00> Explanation Used to select the input format for VIDEO and Y/C input. *1 <AUTO> Either NTSC or PAL is automatically selected. <NTSC> NTSC <PAL> PAL Selects the NTSC setup level. <75> Select this when using with a setup signal of 7.5 IRE. (The inner parts of the monitor are set to the 7.5 IRE setup level to suit the black level) <00> Select this when there is no setup level signal. Selects either YPBPR (Component) or RGB input mode. <YPBPR> Selects the YPBPR signal. <RGB-VIDEO>Selects the video RGB signal. <RGB-COMP .>Selects the PC RGB signal. Selects YPBPR (Component) signal input level. <SMPTE> When the signal level specified in SMPTE is Chroma 100 IRE PB, PR = 0.7 Vp-p. <B75> Select this when connecting a betacam or simliar devices set to 7.5 IRE. (The inner parts of the monitor are set at 7.5 IRE setup level to suit the black level) <B00> Select this when connecting a betacam or similar devices that are not setup to the IRE level. Selects the SYNC when using RGB-VIDEO input. <G-ON> Select when a synchronizing signal is superimposed on the G signal. <EXT> Select when an external synchronizing signal is received in synchronization. Performs analog PC settings. (Refer to �COMP.� below)
NTSC SETUP
YPBPR/RGB
<YPBPR> <RGB-VIDEO> <RGB-COMP.> <SMPTE> <B75> <B00>
COMPONENT LEVEL
RGB SYNC
<G-ON> <EXT>
COMP.
*1 �AUTO� is set when the monitor is shipped from the factory, but if there are concerns about noise etc. from outside the input signal, we recommend assigning specific format. g COMP. The following menus are switched by selecting �RGB-COMP.� in �YPBPR/RGB� in the �INPUT SELECT� menu. The underlined values are factory preset setting values. Sub menu Settings AUTOSETUP*1 Explanation Screen automatic adjustment is performed when �RGBCOMP.� is selected in �YPBPR/RGB� in the �INPUT SELECT� menu. �AUTOSETUP� is performed if a different screen is displayed, and �YES� is selected. Used to adjust the picture display position in the horizontal direction. *2 Used to adjust the picture display position in the vertical direction. *2 Used to adjust the clock phase with 1/32 clock phases. *2
H POSITION V POSITION PHASE
<0�60> (Factory preset settings: 30) <0�60> (Factory preset settings: 30) <0�31> (Factory preset settings: page E-21) <700�1800> (Factory preset settings: page E-21) <XGA> <WXGA>
CLOCK
Used to adjust the sampling clock in dot units. *2
WXGA/XGA
Switches between WXGA and XGA.
*1 �EXECUTING� is displayed while �AUTOSETUP� is being executed, and �COMPLETE� is displayed when �AUTOSETUP� is completed. If �AUTOSETUP� cannot be completed, �INCOMPLETE� is displayed. *2 Each RGB-COMP. input compatible format can be adjusted.
E-20
ENGLISH
