|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I purchased a copy of my old JVC VCR Service manual from Owner-Manuals.com
The copy was complete and valuable to me.
I was able to fix my VCR - it had a bad belt.
I am glad I found Owner-Manuals.com
Great Price. Thanks
;
Great service! I got manual to my sony receiver for very reasonoble price.
;
Good service, well organized. Cheap, and the service manual was as expected. A valuable service for those of us wanting to keep the old junk going!
;
The manual arrived very quickly and had all the information I needed - Very satisfied with this seller. - Thanks -
;
Good quality, the manual help me to repair the echo/reverb section
2-7. Replacement of Board
2-7-2. Replacement of CN-1190 Board
n Every electrical part mounted on the CN-1190 board cannot be repalced. If there is any defective part, replace the board itself. 1. Remove the right and left side panels referring to Section 2-1. 2. Pull out the three plug-in boards, MD-103, AU-211 and TR-90.
5. Remove the four screws and remove the rail bracket.
B2.6 X 5
Rail bracket
B2.6 X 5
6. Remove the two screws securing the CN-1190 board. Disconnect the two flexible card wires referring to Section 2-6.
Flexible card wire
MD-103
TR-90 AU-211
3. Disconnect CN2 from the DM-98 board. Remove the three screws and remove the spacers and the DM-98 board. If the option board DM-99 is installed, carry out Step 4. 4. Disconnect CN2 from the DM-99 board. Remove the three screws and remove the spacers and the DM-99 board.
CN2 B3 X 4 B3 X 4 DM-99 (option)
Precision P2 X 5 CN-1190
7. Install a new board in the reverse procedures of the removal.
Spacer B3 X 4 B3 X 4 B3 X 4 CN2
DM-98
Spacer
CA-550 CA-550P
2-5 (E)
|
|
|
> |
|
