AIWA CADW330
Owner's Manual

MICROPHONE
3 1
(@Mini plug

MIXING

1 Connect a microphone to the MIC jack.

ra ~
.4�. 1!,

�
. l.. l.-

2 Select a source to be mixedl and play it.

3 Adjust the volume of the nmicrophcme and wume to be mixed. To record the microphone
mixing sound Insert a cassette to be recorded on-�into deck 1 and press the .RE12 button.

11
Mlc

m
q

T
a

*O

q

During dubbing at high speed, the microphone mixing sound IIS not recorded. If a microphone is placed too close to the speaker, a hc}wling sound (feedback) may be produced. If that happens, move the microphone away from the speaker or decrease the main volume.

;?

,OW* +
O STANDBYRADIO TAPE b_
q

CD

The use of a unidirectional type microphone is recommended to prevent howling.

FUNCTION

d 43

VOLUME Iv4K MIN

MAINTENANCE
To clean the cabinet Use a soft cloth lightly moistened with a mild detergent sollution,

VOL
MAX

@

Ml. .

. MAX

Do not use strong solvents such as aicohol, benzine or thinner. To clean the heads and the tape path + K! After every 10 hours of use, clean the heads and the tape paths with a head cleaning cassette or cotton swab moistened with cleaning fluid or denatured alcohol. (These cleaning kits are commercially available.) When cleaning with a cotton swab@, wipe the recording/playback or playback head @, erasure head @, pinchroller @, and capstan @.

picq

mm

After cleaning the heads and the tape paths with a liquid head cleaning cassette or a moistened swab, wait until the clsan[?d parts are completely dry before inserting tapes. To c!ean the lens + H If the lens becomes dirty, the player will skip or not play. If thlis occurs, clean the lens in the following manner. To remove dust or dry particles, first use a camera lens blowt?r/ brush to blow a few times to loosen particles, then gently brush the lens @ clean. Finish by blowing �the lens again. To remove fingerprints, use a cotton swab dipped in lens ck?aning solution. Wipe gently from the center to edge. Lens ck?aning solution is commercially available.

Take care not to get too much solution in the swab, which could flow into the unit and cause damage. Pressing too strongly with the swab could scratch the lens. To clean the discs + u Before playing, wipe the disc from the center out with a cleaning cloth. After playing, store the disc in its case.

2�4