|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Thanks God for the internet and thanks for the service like this - proffessional solution on time.
;
About the service it's very fast and reliable. About the manual the quality is high enough to read even the tiniest details on the wiring diagrams so you can't ask much more than that, let it alone for a manual of a product from 20 years ago. Thank you, very satisfied.
;
The downloaded quality was as good as the orignial
 ;
This is a great and complete Service Manual for the Sharp GF8585HB. Giving full and detailed technical insight. Good to find these manuals online.
;
Everything was ok with the manual. If I have a small complaint, is that I ordered it during the weekend and I think you guys were closed. But I did receive it late Sunday. I will surely order from you again
ELECTRICAL ADJUSTEMENT-1/1 PRACTICAL SERVICE FIGURE
L003 BAR ANT 3 1. AM IF Adjustment L007 .................................................................................... 530 kHz 2. AM VT Adjustment Settings: � Test point: C39 + (TP1) � Adjustment location: L004 Method: Set to AM 1710 kHz adjust L004 so that the test point becomes 5.6 V ± 50 mV L005 3. AM Tracking Adjustment L003 .................................................................................... 600 kHz TC001 ............................................................................... 1400 kHz 4. FM VT Adjustment TC001 24 2 3 Settings: � Test point: C39 + (TP1) � Adjustment location: L006 Method: Set to FM 108 MHz adjust L006 so that the test point becomes 5.6 V ± 50 mV 5. FM Tracking Adjustment L005 ..................................................................................... 98 MHz Distortion: (Input 88 dB) Intermediate frequency:
< TUNER SECTION > < FM SECTION >
Sensitivity: (THD 3%) Signal to Noise Ratio: (Input 32 dB) Distortion: (Input 32 dB) Intermediate frequency: Stereo separation: Less than 22 dB (87.5 MHz) Less than 22 dB (98.0 MHz) Less than 22 dB (108.0MHz) More than 55 dB (at 98.0 MHz) Less than 3.0% (at 98.0 MHz) 10.7 MHz ±0.3 MHz More than 18 dB (at 1 kHz)
FRONT C.B
MAIN C.B
L007 1 IC001
5 9
SFR430
C39 4
L006 L004
< AM SECTION >
Sensitivity: (S/N 10 dB) Less than 52 dB (at 600 kHz) Less than 50 dB (at 1000 kHz) Less than 50 dB (at 1400 kHz) Less than 3% 530 kHz ± 5 kHz
< CASSETTE SECTION > < TAPE SECTION >
6. Bias frequency Adjustment L330 ......................................................................... 56 kHz ± 2 kHz 7. Tape speed Adjustment Settings: � Test tape: MT111 � Test point: PHONES JACK (J251) � Adjustment location: SFR761 L330 6 Method: Play back the test tape and adjust so that the output frequency is 3000 Hz ±30 Hz. Tape speed: Wow & flutter: Take-up torque: FF torque: Rew torque: Back tension: S/N ratio: Distortion: Noise (PB): 3000 Hz ± 60 Hz Less than 0.35% (JIS RMS) 30-60 g-cm (DECK 1/2) 55-140 g-cm (DECK 1/2) 55-140 g-cm (DECK 1/2) 1-5 g-cm More than 50 dB (DC) Less than 3.0% (PB) Less than 0.9 mV (DC) Less than 15 mV (AC VOL max)
J251 SFR761 78 7
8. Azimuth Adjustment Settings: � Test tape: TTA-320 � Test point: PHONES JACK (J251) � Adjustment location: Azimuth adjustment screw Method: Play back the 8kHz signal of the test tape and adjust screw so that the output becomes maximum.
< CD SECTION >
9. Focus Bias Adjustment Settings: � Test CD: TCD-782 (A-BEX) � Test point: IC401 PIN20, PIN58 � Adjustment location: SFR430 Method: Play back the #15 of the test CD and adjust SFR430 so that the voltage between pin20 and pin 58 of IC401 becomes 0V ± 0.1 mV.
RPH/PH
8
-24-
 $4.99 CADW540 AIWA
Owner's Manual Complete owner's manual in digital format. The manual will be available for download as PDF file aft…
|
|
|
> |
|
