|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
;
Perfect. Very good service and very good scanning quality. All sheets are very legible. Thank's
;
My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
 ;
This manual is very helpfull to use the Power Supply. All technical information has been available.
For service use the circuit diagrams are very good.
Thanks .
;
Very comprehensive document which is a must-have for any Satellit 2100 owner whose set up is somewhat intricate. Due to the bad quality of the pictures that are rather dark and a bit blurred I gave 4-star feedback.
Recording CDs
You have two methods to record from a CD onto an MD. � Synchronized Recording � Records the entire CD or the program you have made. � First Track Recording � Records the first track of each CD.
To record a single track during play or pause Press CD 3 MD while playing back or pausing a CD track you want to record. The playback of that CD track is stopped, and the same track starts playing from the beginning again. This time, the MD recorder starts recording the CD track. � When the track is recorded, both the CD player and the MD recorder stop.
Synchronized Recording
This is the easiest way of CD recording. At a press of the button, you can start playing a CD and recording on an MD. On the unit ONLY:
First Track Recording
First Track Recording allows you to record the first track of each loaded CD. You can, for example, make a directory of all your best CDs. On the unit ONLY:
1 Insert a recordable MD into the MD loading slot. 2 Prepare a CD.
� Place a CD on one of the disc tray (CD 1, CD 2, or CD 3), press the corresponding disc number button (CD 1, CD 2, or CD 3), then 7 before going to the next step. Make sure that the correct disc number lamp lights on the unit. � You can make a program if you want (see page 26).
1 Insert a recordable MD into the MD loading slot. 2 Prepare a CD.
� Always place a CD on the CD 1 tray. If not, this function does not work.
3 Press 1ST TRACK REC.
The recording lamp on the unit lights, and First Track Recording starts from the CD on the CD 1 tray.
3 Press CD 3 MD.
The recording lamp on the unit lights, and recording starts.
Remaining playback time
Recording time remaining on the MD
When the first track of the CD on the CD 1 tray is recorded, the first track of the CD on the CD 2 tray will be recorded. Recording continues until the first track of each loaded CD is recorded.
When recording ends, both the CD player and the MD recorder stop automatically. To stop recording, press 7. �WRITING� appears for a while. Both the CD player and the MD recorder stop.
4 Replace the CDs on the trays whose disc number
lamp is not lit green. � You can change CDs to continue the First Track Recording using more than 3 CDs. When the first track of the last loaded CD is recorded, First Track Recording stops. To stop recording, press 7. �WRITING� appears for a while. Both the CD player and the MD recorder stop.
� 35 �
|
|
|
> |
|
